Members Lounge (Public)

I don't think it is possible;;;;

I know this system has been going for a while but instead of an alarm system with D/C and PIR on every door will the internal PIR with video do the job? Imo this system connected to the control room is a better option.

I have been told that everyone who wants to work as a security service engineer will have to have a NVQ level 3 if they want to work as a service engineer. I have been told this comes into play in about 6 years time. I have got a city & guilds knowledge of security and emergency alarm systems. Does anyone know if this is true and I will have to get a NVQ ?

Hi guys ,,, hope you can help ,,,,the past few installs of richocet panels I have had problems waiting for the pir,s to set and protect..,,it seems after an alarm or alarm set it is taking the pir,s 4 or 5 minutes to set and pick any movement up .. Any ideas would be appreciated,, Stormin

Hi guys, been a while, how's it all going then? Was away for a weekend and saw this interesting dome camera. As you can see it has 3 objectives, can't quite make out the company logo, looks like three slanted slashes. Anybody know anything about these? Otherwise is something in the air, is Hd-SDI finally coming of age? ADI seem to be flogging off anything and everything to do with standard analogue stuff.

Anyone know what`s happened to the site as I cannot locate it anymore.

can you get these with current regs, rf setting device with sos buttons? I'm thinking no?

On an PD6662/EN50131 system, if the system is activated followed by a tamper, would it send an intruder, followed by confirmed, or intruder then tamper? I think confirmed, but I'd like to be sure as I have a grading exam tomorrow. !

Was in local Maplin on monday collecting something and upon entry spotted all 4 staff standing at the CCTV section with 2 guys, i thought i have a nosey what they doing and they were on the hard sell ... the 2 guys were getting bombarded by 4 staff all chipping in the "merits" of the 960H System they were trying to sell, they were all excited as one begrudginly had to come to the till and serve me and another followed and commented to the guy behind till that this was gonna be a mega sale for the store and he had offered to come and fit it for them as well for free !! £1200 quids worth of total they were both mega excited, the 2 guys left in front of me and as i exited…

Can some one explain the use of the Look down being either diabled or enabled on the pir of the Honeywell DT7450 DUAL TEC?

Hi The scenario: 1. There are 3 sensors, 1 in each room. 2. The battery has been replaced by a new 1. 3. How do I program the Castle Care 1600 Alarm correctly? 4. Are the steps involved: a. Program 1 sensor for 1st zone (Room 1) b. Program 1 sensor for 2nd zone (Room 2) c. Program final sensor 3rd zone (This will be the final door / exit zone) d. Program the EXIT time for leaving. e. Program the ENTRY time for entering. 5. For each of the steps above what is the programming sequence. i.e. 22# etc. 6. If somebody can spend briefly no more than 10 mins I would be grateful. 7. I do not want redirections, links, man…

It is time it went. One rule for everyone, EN50131 only, sick of the British PD's. They are stupid, arranged just to show they are actually doing something and are actually counter productive to security. Time you went with a big boot lodged securely up your arses....

So, did Buddha design the KX detectors on himself?.

Been meaning to post this for a while, I went to a job fitted by a company we bought out to remove a load of vibration detectors ready for the customer to have new windows/doors fitted. Anyway as im going around removing them all I get to the rear door that the customer informs me that the detector is a vibration and contact at first I didnt think much of it but was a bit surprised as I had never seen a Gardtec Shockguard with a built in contact so I open it up to find this!

PAYE, Berkshire/ London area