Members Lounge (Public)

Hi guys anyone know this system I’m old school wired system guy, job in for Monday factory default and service just need to be prepared any help would be great especially engineer manual thanks in advance

Some help please, I was trying to personalise the user access on my recently installed Texecom Connect App, not sure what I have done but all I get now when I try to log in is the message "access to the system is currently disabled". I have now effectively locked out all three users I have deleted the house and reloaded it but still get the same message Any advise how to resolve "access to the system is currently disabled" Thanks

My alarm installer is a cabbage and has left me with an alarm system that doesn't seem to be operating smoothly. He left me an engineers installation manual but the grandmaster code he wrote down doesn't work. [Link removed] details [...] to default the Grandmaster and Engineer codes back to the documented [codes] So I took the panel off the wall and carried out the following steps: [Defaulting details removed] [...] then reconnecting power makes the panel announce a tamper error and refuses to do anything on the keypad. Putting DIP switch 3 back in to the on position stops the errors but wont let me change PIN codes. So i'm stuck at the moment.... wh…

Hi there, Any help would be appreciated. We have installed a couple of FLIR thermal IP cameras which were setup to record on a HikVision NVR. However one of the cameras is no longer connected & displays the 'network unreachable' error in the camera setup section. They are also linked to a Davantis unit too and work fine on there? Contacted tech support who were about as much use as a chocolate fire guard!

Thought this would be a good place to ask: are there any gaps in the security market, to do with anything? Panels? Bell Boxes? sounders? I understand when starting a business (ideally manufacturing) I need to identify where there is a gap and build on how it can be solved. Any ideas are good, I thought this would be a good place to ask because there are many people here with a great knowledge of the security business and how it is changing. Any help/suggestions are really appreciated.

I moved into my present home 4 years ago and it came with (what I believe is) a Eurosec CP8 system installed. I wasn’t left any code or operating instructions and asked a local company to recommission it. They couldn’t get it working and left it with a disabled control panel (blank LCD display), although the bell box and PIR detector LEDS are functional. I am not particularly confident in the technician I had used (who apparently was the last one to service it) and I would like to get a second opinion. Is anyone in the Milton Keynes area up for the challenge?

Hi folks,Quick question. Does anyone on here know Defence Security Systems based around the Birmingham area, I think they could be known as a different company now? Could you PM me if possible?Many thanks,

Hello wondering if anyone can help. I have an infinite alarm which I armed on the remote keypad when I left but when I returned I could not disarm it by either the wireless remote pad or the main keypad, entry set the alarm off. even trying on the main pad the keyboard was lagging in delay, about 10 seconds with each press and the display losses all text for a period. I have checked the mains supply and the internal battery and both metered out ok. I cannot get into any menu. Any ideas Thanks in advance

Hi There Can anyone tell me how to turn off the external sounders (sab) On part set for night time use , I can’t seem to find it in the set up instructions, had this option on our previous Veritas 8 system. My new system is the Texecom Elite 24 thanks Bill

hi all. wanting some pre install info. im installing a RF portal on to a GD 96 next week along with 3 honeywell piezo shocks. I installed the main system 3 years ago but ive not yet used the wireless side of a galaxy before and would like some info on setting it up and things to look out for? any info would be great. thanks Dan.

Anyone else had problems accessing the site today ?, Kept getting a 500 error.

Afternoon Help please. Texecom Premier Elite 24 new installation which I’m setting up some of the zones to help understand its operation. I will be adding another 8 zones later. All zones are EOL and one per zone. However I’ve got an issue with front door contact which is a CQR SC570 (SEE IMAGE) (one on back door as well). It’s differs in that I’ve wired it to the keypad next to the door and connected to the Zone 1 at the back of keypad. This I’ve mapped to zone 17. I do have a 8 zone expander connected to the panel motherboard although nothing wired into it as yet. This zone 17 now shows a tamper alarm (see image). Ive isolated the s…

Hi I was hoping someone might be able to shed some light on a problem I have just encountered. 3 years ago I did a DIY installation of a 9571 with wireless expander and 1 remote keypad with tag reader. Everything was fine until a week ago, when the keypad stopped responding to key presses ( I still got a confirmation beep with each press) The screen alternates between. 9571 V5.00 Checking Bus and the date and time 01/01/2005 00.00 the time clock would begin counting, but it rarely got to 10 seconds before it again showed 9571 V5.00 Checking Bus these 2…

Looking to buy one of these, anyone recommend any?

Just wondering if anyone else carries one & which one you use ?.