Jump to content
Security Installer Community

Leckybill

Member
  • Content Count

    5
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Leckybill

  • Rank
    Newbie

Location

  • Location
    Gourock

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hi there, the penny had just dropped when I divided 999 by 60, I didn’t realise it was 999 seconds, well hopefully I will be up and sort things before the 16min 65 sec are up thanks again for your input. Bill
  2. Hi there, I’m sorry I’m not getting it, if you set the timer delay to 999 how does that equate to 16mins ?
  3. Hi All Just an update to my earlier post Texecom gave me the solution to my question how to silence the external sounders at night during part set and this was the solution below, maybe of help for people like myself retired electrician DIYer thanks again to those who replied. Enter engineer codePress 2 (Area Programming)Press Yes/TickPress Yes/Tick (Timers)Press Yes/Tick 7 timesPress No/X, 999 then Yes/Tick Regards Bill
  4. Thanks for your help I’ll have a look at that, yes it’s about not disturbing the neighbours, I’ve put a small toggle switch on the bell output until I can resolve the issue. Cheers Bill.
  5.  
    Hi There,
    Sorry new to this forum and put the message in the introduction page, can anyone tell me how to turn off the external sounders (sab) on part set for night time use , I can’t seem to find it in the set up instructions, had this option on our previous Veritas 8 system. My new system is the Texecom Elite 24
    I’m not a professional installer more a retired electrician did serve part of my apprenticeship doing alarm installs, when ultrasonic units/detectors were the size of a shoe box, PIRs were half the size of a shoe box, wired the roof of the cigarette store every two inches with a small single core cable using a staple gun and control panels had a red and green light with a key switch Happy Days.
     
    cheers Bill
    •  
    1. Specialist

      Specialist

      Hey Bill: Welcome, yep I can well remember being shoved in attics with a roll of Hard drawn lace wire & gun to wire it as a nipper.

      Woe betide you if you messed it up and the runs weren't straight. Or god forbid, did the unthinkable and snagged / snapped the wire, happy days:rolleyes:

       

    2. Leckybill

      Leckybill

      Hi There, yes the other thing I hated was the window foil tape then varnishing over it getting it to help stick on the glass was a challenge if the window was full of condensation due to you breathing if it was a fairly confined space, no break glass detectors then, most of the control panels consisted of a hold on relay, now you need to be a computer wiz kid happy days. Bill

    3. Specialist

      Specialist

      Yep foil could drive you nuts in the winter. We used to have a small fan heater in the van & that got put in front of the Windows for a while before they were cleaned or touched. 

       

  6. Hi There Can anyone tell me how to turn off the external sounders (sab) On part set for night time use , I can’t seem to find it in the set up instructions, had this option on our previous Veritas 8 system. My new system is the Texecom Elite 24 thanks Bill
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.