al-yeti

Being a house basher only, op is blagging in my view Op took NVR done place over or inside job, insurance company has taken panel already and now op or someone is wondering if the log can be checked because they didn't think of it before I watch to many movies maybe..... Or hanging around you monkeys and baboons is driving me more crazy

Interesting police response that didn't work , as above ask your alarm maintainer what has happened seems as though there insurance may have to pay up

What's tech support say? you buy from electrical wholesalers?

The wall plate you think it's an mk?

Ok so you got a good contact then What alarm system you fitting? Yale or visonic or Honeywell Evo? Oh forgot to say "hi" HousebashersRus

House bashing type or insurance approved?

Yes that's correct on dimension, I meant it couldn't come up with just fault as you mentioned, Perhaps changing it to 24hr? Custom Sia etc might solve the issue or customer zone and make links where appropriate or something to stop the message display James or nova or galaxy guy know better......they sleeping tho

Thought that was normal , does it say on keypad system reset required once triggered ? I doubt it comes up with fault but then I just a house basher

Might be a network card ? What's the full setup , expert will be here soon , I keep you entertained, mean while back to bashers cave

Your upvotes are at £299 by the way

But isn't that usual they drop existing maintainer because of charges , realise after this not a Yale panel , and better call someone who knows Mind you the Yale is probably harder to fix lol because they so problematic lol

Yes that's best wait until something occurs then it can work as you said or scrap it

Normally the external bell will not sound when you take a cover off, internal bells probably will Also if the panel has a lock feature then doing this won't work, all you will do is reboot system and be possibly stuck with a tamper reset required by engineer and won't be able to arm the system , the lock feature protects the engineer code I assume you don't want to pay "the" engineer , or a new engineer to do this for you ......

Doesn't make sense at all to keep this going

Why didn't you use hik ? Just wondering seeing as hik own pyronix , and stuff is being integrated

For DIY?

If your willing to try and change batteries then you could disconnect the horn and cover the keypad to stop the tone It will go into tamper and then you will have to wait for engineer anyway or default it and reprogram Being a 264 I assume has plenty detectors / circuits being used , or you have no idea on that either? Call another engineer ? Either way so done has to pay Sounds like usual they don't want to pay lol

Hi Where you starting ? Yale? Hkc? Pyronix? Firmware? (Texecom) Honeywell Evo Honeywell Or whatever else

Only if the user code is set to that level reset You don't have no coms that they could dial into?

So add a four way switch there if you also have mains power there and take both cameras off the new switch

Unbranded and they dear , security warehouse decent brand and cheaper but op is worrying about returns incase panel pops https://www.screwfix.com/p/sealed-lead-acid-battery-12v-7-0ah/38315

Do a drawing or upload a picture of what you have done If the relay is energising then must be the mains side of the relay you have done something wrong

You haven't hard wired yet though From default

You would it , you still have a timed exits or instant set , or contact set depending on how everything is setup I don't really know the panel well just entertainment for you while everyone is having tea break

Is it because the user is a manager level or something? Perhaps change there access level , it's like that on some systems