Jump to content
Security Installer Community

al-yeti

Trade Full Member
 View Profile  See their activity

  • Posts

    9,527

  • Joined

  • Last visited

  • Days Won

    135

 Content Type 

Everything posted by al-yeti

  1. al-yeti
    Unless panel is locked won't do anything And you understand if it isn't locked and you default , everything will default and you will have to programme from scratch! Or you trying to default codes only , defaulting info isn't given out on this forum by the way Why not just get the original installer to reset for you? Otherwise you may run into lots of.problems
  2. al-yeti
    Might be Press prog Enter existing code Press 8 Four zones light up Enter new code Press reset New code should work , this is an old user manual I have I don't know how many panels are called concept but might be same
  3. al-yeti
    Get user manual?
  4. al-yeti
    Unset bit??? What you mean bit?
  5. al-yeti
    Maybe service timer Need engineer Better to scrap it
  6. al-yeti
    Viper they is just the cheaper version that tvt make but better than there other brands imo , I don't buy it from them myself but know that versions they sell , all made by TVT including the domes bullets associated with the viper , all tvt products
  7. al-yeti
    Qvis version dont use superliveplus? That's a tvt machine that qvis have started to supply called viper , unless your saying there explorer version has been modified to work on superliveplus Explorer is there new app , forgot what the old one was called which can no longer be downloaded even though electricians still sell what's left confuses them as box has old app on it
  8. al-yeti
    As James having full bars doesn't mean mean path established
  9. al-yeti
    Hi
  10. al-yeti
    WiFi problem? Assuming when you get the problem your internet is actually present
  11. al-yeti
    Unscrew it and scrap it
  12. al-yeti
    At what
  13. al-yeti
    Nah 4k7 Redredred? 2k2
  14. al-yeti
    D- to 0v D+ to 12v STB to STB Bell to bell Z33 to T Then leave resistor as you have it, you have a 4k7 there which needs to be also programmed in wiring selection choice menu
  15. al-yeti
    Also I think your white wire needs to go to z33 and z33 is programmable in menu as a bell tamper , z33 normally has the resistor on it in series so like white wire connects to resistor and then resistor goes into z33 , resistor mostly goes in bell , but your in bench DIY unit won't matter Been a while since I did this , isn't D- , zero volts so that's where the black would go ?
  16. al-yeti
    Why is resistor there? Just put a striaght link in
  17. al-yeti
    Can you send pictures how your wired it or drawing or aomething
  18. al-yeti
    So basically ee full of it and talking rubbish.....
  19. al-yeti
    Does it connect via the hik P2P on his phone?
  20. al-yeti
    How far you got then?
  21. al-yeti
    Sab box is no good for these small panels , on power cut, for any reason they can't give the hold off voltage required so you will get continuous bell rings etc
  22. al-yeti
    Do you have the wired module in the panel? The ag6 is no good for this panel as it doesn't have scb mode from what I remember , pack it send it back and get a texecom odyssey 1e or something like that After thought if you have a WiFi module installed can you still install the wired bell module? As I thought there was only a position for one board , or is the WiFi onboard the V10 main board? Someone else might answer that bit
  23. al-yeti
    I don't get it , as others have kind of mentioned , why did it get to a heavy hefty bill rather than the alarm company or arc not notifying of the failures and that something is wrong Or is this how it is , asking monthly parent is made coms failure is a side issue lol You means coms between arc and alarm company? As arc needs to inform alarm company , alarm company speaks to customer Sums it up
  24. al-yeti
    I don't know what it's called but I fixed a dialler issue this way as they wondered why it wasn't dialling out since fibre went in , the phone socket was the white fibre box and was already active
  25. al-yeti
    Bt Fibre to home , line voltage is local , seech diallers have no problem dialling....
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept