Trade Control Panels

I have a fault or a parameter turned on.... The galaxy will fully set, then display will turn blank? And it's a nightmare to unset for the user so they say... Any thoughts?

Hi All, I no I've got the user guide for the above-in triplicate somewhere-but where the fook I've actually saved them is tittsing me off big time, windoze 8 is aint helping my cause tbfh. Thanks Guys.

Hi all, After a bit of feedback please. It is my understanding that NSI companies are required when commissioning a system to take the signal strength readings from any wireless devices. In practice this is pointless as the signal strength shown could change 10 minutes later, so the question is, is this a relevant measurement to take ? Is the point of this reading to indicate a possible issue on site at that point in time, or is it to be used for comparison purposes at subsequent service visits. The signal strength shown is usually in dBM but is that useful? Would it be more useful to show good bad or marginal with an option to look at actual dBM. Would it also be use…

Hi guys took over a site today with the above panel installed. Only thing I'm stuck on is the previous installers name is on the banner and I could not find option in the menu. Also is there a quick reference guide available as to menu numbers?

AE-2 768 R and AE-2 769 R I've been asked to take over a system which includes a pair of separate control panels which, apart from the make, I know nothing about. I suspect they are hybrid wireless panels linked to the main system, but a search has not revealed any info. Can anyone help? Thanks!

I'm playing around with a galaxy flex using EF (over emizon). Relatively new to EF. I can't see a zone bypass event which I assume will be BB. Dropping the bell time down to 1 min, opening circuit and leaving open, system re-arms (i'm assuming it does anyway as internals cease but it doesn't signal this, i would have thought it would) but i don't get a zone bypass signalled? 51.09 set to 2 and the circuit i'm using is omittble anyway SIA 3 omit is ON ??

i dint suppose anyone has a couple of old alarm panels they have removed from premises that still have the sets of battery leads do they if they have could someone pm me i need a couple of replacement leads unless anyone knows where i can buy them from online. many thanks,

Hi guys been to a site today to quote for a upgrade. There is a Aritech CD91 with 6 keypads iinstalled with around 50 inertia sensors on all the windows with analysers etc installed.the job is in the south of Ireland. Are interias except from grading? Or will I need to upgrade them all had a look online and none mention they are graded. What controls can you use interia zones on can Castle do this?

How do We have loads of old TS stuff knocking about and used to programme them the hard way, on site via RKP. We had a DCI with printer so when the job was finished print it out, jobs a good un (especially on a multi warded 2500! Anyway, this went missing for about three years but i've found it! So, having used downloader with the M series with no bother, I want to be able to connect to the bigger TS panels out there and take a download. Having a play today with a 690, but with no real success. What i've done, set up the site, site no/password, matched them in the panel. Click connect, 'usually' it connects after going though the checks...... then tried to upload som…

Yes, I know it is old (very) but there is no way the customer is going to have it replaced, can any one help with a manual please? Intellect Home Watch. magpye

Hi we've got to quote for a new build that has has a bad 1st fix done by an electrician. Could anyone recommend an all in one panel with an LCD screen grade 2, 8 zones prefferably with wireless add on if required? Don't really want to have a plastic or metal end station with a keypad next to it unless we have to and we dont really want to have to fit grade 1! Any help in the right direction would be appreciated!

Is Auto Arm acceptable on a PD6662:2004 system? I'm not talking about arming from a ARC but set times in the panels programming.

Ive heard now from a couple of people that the G2 is going to be dropped. Anyone know if this is really the case? Im assuming they want to drop it to drive spend into the flex?

Hi Can anyone tell me if we can default a Galaxy 2/20 and if so how this can be done as we have a takeover on one next week and I dont realy want to change out the panel. Rgards Nick

I lost two jobs last week both wanted wireless quoted them the Enforcer fully installed and connected to phone line just as kit no extras and bang they go online and say I can buy it for xx which is cheaper than you. Yeah but we install it for you and look after it for a whole year. Still expensive sorry. Doh! I thought pyronix did want the enforcer sold online at all only trade not end users could buy it!