Trade Control Panels

User and eng thanks. Fitted first and last one, last friday, Ive now found out at first hand experience how ***** (should have used capital letters, large ones an all) ADI is. I'll post later

f'ck me http://www.ebay.co.uk/itm/TEXECOM-DIGITAS-XTENDED-LOG-XL-ALARM-CONTROL-PANEL-WITH-INTEGRATED-COMMUNICATOR-/280806521790?pt=UK_Burglar_Alarms&hash=item41615f7bbe for that old tat !

Anyone recommend a good fog machine which doesn't require us to sign up as distributors? Only ever used Bandit before but don't want the financial committment they require.

Anybody given the gibbon anything "real world" to compromise ? eg. the IP of of an Alarm of DVR & asked him to confirm he can gain access by revealing the code that protected it or whatever

Has anyone else had problems with the Lightsys PSU's?

What lims do they use and can you still get them?? Ta

Third one now that falls out when opening the panel. Did mention to them and they asked if I did`nt have any plastic legs (Awaits the jokes). Not the reply I had expected. They come with them, not inserted correctly.

Job today, customer had new phone system fitted and system now shows report fail FTC and won't let them set. Found 38 volts on Bt line and no dial tone - telephone company who fitted new system apparently wernt told the alarm system was on the line so left it disconnected in their DP. Strange thing is tho apparently it only gave the fault last night, but the line would have been down for a week. Any idea why it wouldn't show straight away or within a few days. Had. A look in the menu but couldn't see anything obvious. Also Matt will theses do UDL without any extra bits. The system is on a digi only.

Just reading through the document to double check something and it got me thinking about the filter times. There is so much emphasis on the unsetting method and confirmation must be disabled etc if using 6.4.3 as an example so it makes me think that they should have removed the 120 seconds filter from the ARCS? The customer and us have to work to strict guidelines for unsetting so why do we still need the 120 secs filter?

I want to replace the standard one with a 110v in transformer - any ideas..

I can get around them (just!) but is there any way of viewing circuits one at a time? I know you can view open circuits, but what about circuits in isolation? I'm ****** if i can find anything in the programming?! !

Hi All, A friend of mine has moved in to a brand new house, it doesnt have a intruder alarm and so he has asked me if I can sort one out for him, the best solution would be wireless. We normally use Texecom Rochochet however with no wireless keypads or wireless bell this would be a pain and so I have had a look and come across the Pyronix enforcer, question is has anyone used this kit before and how would you rate it?

This sounds familiar

Went to an ATS advisor today Apparently bell output not working .( worked 6 months ago on a maintence ) System is bells only with an sd1 speech dialler No codes onsite eng code is known but not master manager Manually tested bell - no faults so must be the output? Am I right in thinking its link 2 which defaults the codes but not the programming ? Could I hell get it to default .

For those havnt seen it yet