Members Lounge (Public)

Does all HD-COAX work using baluns?

Just looking at the ACT 336L Lithium battery tester, Has anyone got one of these, And are they worth buying http://www.actmeters.co.uk/battery-testing/336l-3v-and-36v-lithium-battery-tester Regards,

got a site with a H.264 PRO2 dvr , it wont boot up and the SEQ and PLAY/STOP buttons are lighting up when i'm trying to power up. Anybody any ideas on this or a tech support No I can call ? if somebody knows but would prefer to email me please let me know and I will provide my email addy.

Hi Added a extra keypad to a euro mini panel , powered panel back up alarm sounded , entered code into original keypad wouldn't silence alarm Thanks for any comments

Hi can anyone tell me how reset the system please. My some tripped over the battery box in the loft and it registered it as a tamper event! Thanks in advance Zach

On 1st May this year, I found it was possible to dump the names, addresses, emails, usernames, and phone numbers of every single user of every single company who had registered on the CSL M2M SIM page. I did not push the investigation any further, but worse may have been visible. http://cybergibbons.com/alarms-2/customer-database-leak-on-csl-dualcoms-sim-registration-portal/ If you would like to know if your company was one of the listed ones, I can check for you.

Can anyone help me out with a medium sized Satel alarm configuration? The job is in central London.

Looking for HD CCTV products, anyone rate COP? What other good suppliers?

Hi Can anyone give me there thoughts on the G4 panels Thanks

What do we do regarding this. Do we just port forward or is the client informed about the risks? http://www.engadget.com/2015/10/25/cctv-camera-botnet/

http://a.msn.com/r/2/BBmoAdo?a=1&m=EN-GB What format is this being sent in and how?

Mm , where the hell does the engineer hold off connection from a deltabell go to on a euro 46 ?, One manual says 0v, another says pgm . It does hold off if I stick it to 0 v , but do I have to connect it and disconnect it each time I want to acces the bell box.

Hi I would like to add an extra siren to my alarm system, I already have a pyronix belle which draws approximately 420 ma and I believe the maximum power output for my panel is 1280 ma approximately, however I have a elmdene 1 amp 12v psu just powering smoke detector so I would like to wire the siren trigger from the main panel and take the power from the psu but in theory it shouldn't work as it is not completing a circuit so I would need to know if it's possible to take the + and - from the psu then add a relay and wire it from the bell trigger cable to switch when the alarm is triggered, so the positive and negative wire into the relay and the positive stays connected…

Hi All, Just gone out to provide a quote for an install using existing cables. Now the existing panel was positioned within a walk in cupboard that is currently been converted into a toilet area including a wash basin(no shower or bath). Now I said to the client I can install the panel else where but they want it to stay where it was originally. Now I understand that a bathroom including a bath/shower would defiantly come under a notifiable job under part p, and all electrics should be at least IP33 rated. would an area with a toilet & sink be ok?, or would this still be a problem?

Anyone fitted on of these: http://www.amazon.co.uk/gp/product/B002P6EQPW/ref=s9_al_bw_g60_i1 Seem to get good reviews.