Jump to content
Security Installer Community

MrHappy

Global Moderator
 View Profile  See their activity

  • Posts

    17,860

  • Joined

  • Last visited

  • Days Won

    731

 Content Type 

Everything posted by MrHappy

  1. MrHappy
    what does "high resistance" do when the system is set ?
  2. MrHappy
    Changing both the controls & the sensors will be too dear for the sub
  3. MrHappy
    lol, I was guessing it may have been one of the late great "arfurmo" systems traded as something eye from wickford or thereabouts. But w/o the use of a ouija board we'll never know
  4. MrHappy
    swapping the colours around make no difference to the circuit, your picture shows the strands of the cable touching.... that is probably why it was in tamper
  5. MrHappy
    long shot.... Essex ?
  6. MrHappy
    ah, if your doing favours or there's little or no money attached... just remember old iD systems can be a pain, I no longer see any of our ADE iD panels, if one crawled back out of the woodwork I'd move it to premier with an iD expander. The bell "squawk" will either be an option in the menu's or something programmed as a "set" output or similar.
  7. MrHappy
    Ebay, looking in leading security wholesaler portal- more than double, +vat
  8. MrHappy

    Hi all

    MrHappy replied to Gellis's topic in Introduce Yourself

    Its a national co. & the engineer doesn't want to do cash in hand work for the OP.... The OP probably has a wireless contact from ebay which he assumes will work with national co. system.
  9. MrHappy
    yes & 4i ain't so far....
  10. MrHappy
    All these yrs I've read all your content like Apu from the kwik-e mart
  11. MrHappy
    I'd say your buying the "Wong" stuff
  12. MrHappy
    you may get extra costs for import duty
  13. MrHappy
    You've seen our Pug van then...
  14. MrHappy
    cost £0, "MOT" fail no tamper circuit panel date says 1996 but wiring looks older ?
  15. MrHappy
  16. MrHappy
    knew there was a pic some where.... Lexamrk make some smashing printers
  17. MrHappy
    mono ?
  18. MrHappy
    £4 over - https://www.printerland.co.uk/Lexmark-CX317dn--P139622.aspx
  19. MrHappy
    Iirc dell printers are rebranded Lexmark I have cheapo mono dell printer & a Lexmark multifunction cira £160inc vat However genuine toner is dearer than others. Scanning stuff is quicker & easier with a brother ADS rather than using MFP
  20. MrHappy
    +150mA for the controls ? + bell, modern low current one 60mA in day call it 500ma for easy math ? lets call the 2200mA panel battery 2.5A for easy math? so just 5 hr standby I'd assume the psu to be rated 1A & assume the system will draw more than this in alarrm ?
  21. MrHappy
    remove all wired devices off the system & set & then unset the alarm if a fault are still logged, move the router further away from the controls & try again if you get it working next test is wire everything back set it , remove power & let it ring for a bit turn it off & leave the power off for bit longer....
  22. MrHappy
  23. MrHappy
    because a panel, keypad, app card & 3 zem is much dearer than an enforcer + 4 zem ?
  24. MrHappy
    My old alarm collector pops in once a week & Empties the wheelie bin
  25. MrHappy
    yes,
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept