MrHappy

Burglary hotspots are normally served by Yale or the local "value" alarm co. I been knocked back on a few areas where I can't afford to live, one with keys for ragtop A5 left in the garden as they could get it started

I try to avoid speech diallers, IIRC the last time I had the misfortune of touching a Texecom speech dailer it had all the menu's for texting but was the speech only product.

you get electrical survey/certs when you bought the house?

only had r28.

looked at the relays to see if there blackened ?

doing alarms is a greater pain in the ass....

do you want to decorate a room then reinstate a 25yr old keypad ?

or.... just leave wire poking out of wall, until you've plastered, painted or wallpaper & then fit something decent ?

whoops... 1st I'd link loop at the pcb & check the new controls, if the fault reappears when the loop is put back on the panel, I'd look 1st at the devices which contain isolators, good luck

wow, that looks like proper tat....

ITS BROKEN...

being northern & poor... a £400 intercom for people to wear out or vandalise ? I'd use a normal intercom with a PSTN interface, However I'd not expect a dental surgery to operate without a reception ?

you have an anlogue line(s) on this proposed IP PBX ?

consumer products - eg an IP Phone are consumer electronics..... cheap & freely available a 0.5mm drill from screwfix is quite cheap, a medical 0.5mm drill is quite pricey...

There's different versions of same products.... If you have a picture of the PCB a popular alarm forum or whoever rebranded or manufacturered it might have be able to help

doubt it...

I'd say we'd have the correct manual for your product.... We just don't know which one suits your product w/o seeing the PCB....

IIRC xr1 is panel with on board keys x2 is panel & keypad when the ADE product changed models Senate still called there's XR You need product knowledge of ADE pcbs to you guess what your "xr"is really is There not graded & the programming makes little sense to me, I take the view that paying me an hr to program it is better spent fitting better controls

You have picture of the PCB ?

There's lot of different ade products which look the same & it gets worse when rebranded... I'd prefer to bin it off

day 48....

so not Powermax or Pyronix spelt wrong ?

if people are happy to bee paying £50+ for a jar of honey..... Then I must bee very poor

I assume they think I'm going to reply & paid for leads ?

yes, shit loads of 'em