Members Lounge (Public)

Hello, Sorry if I have posted this in the wrong place! Mods please move it if it is! I am looking for someone to carry out work installing/upgrading the following at our premesis in Coventry: Access Control CCTV System Intruder Alarm Fire Alarm Intruder Alarm: The building previously had a Honeywell G2-12 system installed, I need around 4 PIRs adding, and a couple of rollershutter/door contacts. In addition to this the keypad location needs moving, external bell re-connecting and I need the system re-programming and setting up to an ARC. Access Control: Standalone Paxton System on 2 Doors. 1 External with Intercom. E.g: http://www.tlc-direct.co.uk/Products/DECSP…

I guess it takes all sorts http://burglaralarmbritain.me/about/

I recently saw one of these connected to the intruder alarm but can't remember what brand it was. Does anyone know a manufacturer who makes them?

Anyone have any experiene with these? The data fusion technology sounds really good. But they are a little more expensive then standard sensors. http://www.boschsecurity.co.uk/content/language1/html/509_ENU_XHTML.asp

I have not been on here for about a year. Anyway guys, I hope you are all well. Catch you later. Ian.

Can you guys tell me what you normally install in and around peoples homes now days. 1) What NVR / DVR units? 2) What CCTV Software? 3) What IR External Floods? 4) What Internal and external IR Cameras? 5) What Wifi solutions, if any? 6) Power supplies / Poe injectors? Remember im talking home equipment, not super high end expensive corporate stuff (although im aware some home kit is very expensive). I'm looking to install 8 - 16 cameras tops and maybe a couple with audio; so if you can recommend some kit that you've tried and tested that would be wonderful. I need your suggestions fairly sharpish though as I've been told by the local athority to take down my curre…

Searched everywhere but the only place i can find is in the USA. Hoping someone on here will know where to buy it from. It has to be the tilt version. . http://www.visonic.com/Products/Wireless-Emergency-Response-Systems/Fall-detector-mct-241md-pers-wer

Hi guys Just a quick one to see if anyone can help me out, im an electrical contractor who is starting to get more security work and am wondering if you can help me out. How do i go around calculating the battery size for any of the systems im installing. heres an example of one of my jobs 19 x Pyronix me blue detectors 1 x 16 Ohm internal sounder 1 x pyronix deltabell external sounder 1 x scantronic 65en panel 3 x ms nodes can someone help me out here and give me details on how to calculate this.

ok got this wireless alarm fitted to my house anf the main unit has been flashing as battery low on number 2 sensor, so i changed the batteries but now the main unit is flashing number 2 and the tamper light is flashing. in the manual its states the tamper button is flashing due to a unit being tampered with (must be the one i changed the batteries on) but says i must contact the alram company??? its making a beeping noise every now and again anyone got any ideas before i hit it with a hammer thanks

I have recently started doing a lot more management work and was looking at doing a few courses.In september i looked at a business management course but dont currently have the £1000 required for it. So was looking at this instead as a building block. Do you guys think this will be of any use in a security management position? Which is the way i seem to be heading in my career. https://enrolments.macclesfield.ac.uk/coursedisplay.aspx?CourseInformationID=7963

hi just installed a fusionsea cctv kit but has come without the firmware disc can anyone help as i cant find a download anywhere

Hi all It's been a long time since I have done a airlock with two maglocks and contacts so I can't remember Has anyone got a drawing for this Thanks

Just had an e-mail from cooper stating that the O2 message centre number is to be switched off at the end of march 2012. Just for your info guys.

I have an alarm system with two TS800 remote keypads. On of them has developed a fault with the keys where they don’t always respond unless you press them really hard when the weather is cold. I have a spare TS800 remote keypad but my alarm servicing company refuses to fit it and insists I need a new alarm system – this seems expensive overkill as it’s just a temperature related fault with the keys on the keypad! Please can somebody tell me if I disconnect the existing pad and swap it for the spare, will the alarm systems recognise the new remote keypad or would I need to somehow program it to the alarm control box? Also, the keypad has a tamper switch on it behind t…

Hey all couldnt see a thread like this so i made one for any tools and or equipment we all buy and if we've got a bargain why not share it picked up a ratched screwdriver frm screwfix £2.99 with 6 bits - bargain i think lol over £4.00 saving anyone else?