MrHappy

resistor on the screw 1st & then wire appear to work better...

you want the same sized screw driver you'd use on connections inside a fused spur you don't need crimps or anything to terminate resistor or wires* into these PA's (*or iD biscuits) when put the conductor onto the alarms cable, are you cutting a bare bit of 15mm ish with bit of insulation on the end & giving it a twist ? if it was going in a pir you'd cut the end & shove it in.... if going around a screw you'd twist it around & cut the excess off when the screw is tight its pointless looking at the panel readings there only a guide, if its going to play up due to poor termination, place the system in day & firm the device with the handle of your screwdriver

@ttstick looking at the screw heads I'd assume your use the same screwdriver to terminate the button & the keypad ? If so I doubt the button or jb's connections will remain tight ? The texecom supplied resistor have really thing legs The cable & resistors are really short, do you terminate the cable conductor with a twist ?

I think you should have spent longer at school ?

Vandalism badge...

glitter... so like the early 90's ADE ?

I thought you was an ADE fanboy ?

you must be doing something fundamentally wrong ? take pic of the problem item & TSI will advise / take the pish...

I understand graded sensors have eol jumpers & jb's have tact switches due to wiring faults ? Personally I found adding resistors or leaf tampers worked for 10yrs + before EN

yes, we saw the hat....

Google says "Roger I of Sicily" was a Norman.... which is viking ish

to get rogered by a viking....

yeah I know, despite doing alarms I can read & write.... (spelling & grammar ain't great)

Gen question- Why do you have incorrectly wired plug with exposed parts?

agreed, I don't like those tiles either...

still not tried it on webway, however the longer I hang on it the more little the shite pile grows I currently have- ade accenta 9448 battery pifco thing m800 odd c&k thing (800 onboard) some veritas tat a metal twin flex a plaggy c-tec I will send up to 10kg on landfill ? c/w your I-on

you got a tamper circuit on this contact ?

treat youself... https://www.ebay.co.uk/itm/Scantronic-Mosaic-840i-Intruder-Alarm-Panel-and-Mosaic-930-keypad-used/174283414775?hash=item289419dcf7:g:V5UAAOSwGYJeuWjk

I though all you Manc lads would have ripped the controls out on the 1st visit..

some sort of panic prob ? either a button on a circuit or something to do with key 1+3 ? check wiring, power cycle, default reprogram or rip it off the wall & stamp on it....

@datadiffusion when did you change both your surname & company name ? are you in a witness protection program or something...

I'm too old to collect bubble gum cards....

you gonna be gutted when I close your a/c...

there wasn't any to remove, I may have the m800 which was rigged up to the beams on the roof (in place but not used)