james.wilson

grade 3 i like Optex and Honeywell detectors. Elmdene or Knight contacts

that type need to be vertical. Id assume that d is top keeping the sensor horizontal

got a pic?

I'd advise you do, you do know the liability your taking on just by working on fire generally?

be 4 mp but ty if you find one that I can use for testing on a 5mp camera please send me a link?

Ideally you want one, if you can keep it going?

if it needs programming you need to be in that mode

as norman says cct 8 isn't programmed as you want.

just the same then, yes you can. you also dont need to use circuits on the panel

it activates the panel as the circuit its connected too will be programmed as keyswitch

Looks like this Does ahd, cvi, tvi, onvif and hdsdi tone tracker and cat 5 tester but on the coax side only upto 2mp

you could always upgrade this important system. if its important?

That wont work, your reader is acting as a key switch. your panel is too old to support native prox

as you cant spell either Pete, you giving up or just after the blue badge?

I dont know what you mean, but the last time i did this i connected the Hold off - to the tamp return of the first box

in series from the first

Ah yeah

I would start a new thread. It sounds like you are talking about a galaxy mk7 keypad.

is the reader actually reading?

is that controller definitely in comms with the pc

as above are you hoping that entering 1966 will disable it. If so would this not be used by burglars? you can't disable it like that as its not a diy bit of kit.

Qfa but must be proper old

I would say the external fail safe timer has stopped it for now

can you give us a picture of the sab module?

afaik other devices need the flash tool. I'm sure the spi key will only upgrade the firmware in the panel