Jump to content
Security Installer Community

james.wilson

Admin
 View Profile  See their activity

  • Posts

    30,678

  • Joined

  • Last visited

  • Days Won

    288

 Content Type 

Everything posted by james.wilson

  1. james.wilson
    Qfa but must be proper old
  2. james.wilson
    I would say the external fail safe timer has stopped it for now
  3. james.wilson
    can you give us a picture of the sab module?
  4. james.wilson
    afaik other devices need the flash tool. I'm sure the spi key will only upgrade the firmware in the panel
  5. james.wilson
    you need a spi key for upgrades
  6. james.wilson
    hello
  7. james.wilson
    what was it out of forum interest?
  8. james.wilson
    You might have a rough idea?
  9. james.wilson
    bell is bell - set needs to be one of the programmable outputs telephone doesn't matter a and b is 2 and 5 in the master socket
  10. james.wilson
    It maybe your phone line converter. If it has comms in the queue it will keep retrying. dissing is disconnecting if you have dissed one of the legs then its not the device hogging the line. When you say engaged what do you mean, I took it to mean it was dialling etc?
  11. james.wilson
    whats plugged into the phone socket on the panel?
  12. james.wilson
    if you use home3 / home4 numbers iirc these will dial a phone there are 4 different tones depending on the alarm event
  13. james.wilson
    or positive tamper return?
  14. james.wilson
    got a pic of the side? My initial thought is molynx
  15. james.wilson
    I'm fairly sure a 16+ can dial directly a mobile etc. It's been a few years since I've worked on a 16+ though. I'll check a manual when i get to a pc
  16. james.wilson
    if you have programmed the digi side it won't work direct to a phone
  17. james.wilson
    Hello
  18. james.wilson
    id assume then it wants a pulse to open? then time out and reclose?
  19. james.wilson
    is the shutter an auto close one? I would also say it shouldnt be toggle as it will stay active until a valid card is presented or rte is pressed
  20. james.wilson
    from a relay that operates when the system is armed
  21. james.wilson
    the from alarm pair is an open close clean switch to show the paxton if its armed or not. the to pair will go to a zone programmed as keyswitch momentary
  22. james.wilson
    qfa
  23. james.wilson
    it does give early warning of contact failure
  24. james.wilson
    what's fitted currently?
  25. james.wilson
    is it a contact?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept