james.wilson

they may look identical but the pin layout may be different check this first, o think there is power on the port

Would welcome some feedback on the upgrade. those that know its rocky vs centos, but im bound to like cos of time spent.

Not in your area mate

I proper dont get the love for enforcer, but yes better than a risco

I've never heard of it nor been asked about it

With wireless systems you need all devices to be compatible. This usually means upgrading all devices. But some panels offer backwards compatibility. The wisdom was old 1 way tech as such no

its only took days of planning and actually making it work. If id of read the manual who knows Its ipb5 so way more responsive on mobile vs desktop but i dont like the home view

Hopefully all done for now

Its alright im still up working on it!

We will be offline for a few hours

Hkc have a doorbell coming in the next 8 years

Bear in mind ring is a diy product not a professional one. But any wifi device can be jammed. You always want to have on site recording and ideally cabled. Some people reley on edge recording (sd card in the device) but if the device is removed the footage is gone too.

Lol

Don't use global tamper if you don't need to.as 6 days change to fsl and the panel will identify which detector/wires have the issue

Disconnect it and see if you get the same event message?

I'm sure you can balance it with different values. I'd test with different values and see but you might be able to calculate the swr. Can you add capicitance on the run? Your big issue is going to be reflection. Stick a scope on it and look. Or go back or recable

Testing the 2

I also do that and no i cannot. There is a mod to connect to the cloud service but polling is slow as its pulling from the cloud. I use output modules and an esp32 to get the events from my hkc 10270. I have wifi gsm on the app (and a dualcom)

rs485 'should' have termination resistors. Might help if your cable is truly shocking. Ive run rs485 2.5 miles as a test in the ancient past but on twisted pair belden

Yes needs a firmware update very old software. You may also need to turn off some of thepolice options. As its a proper panel it is setup for police response out of the box. Also the 4g modules etd wont work without an update

Agreed had issues with managed switches in the past

Check before you fit it self cert doesn't meet g2. If you cert it that's on you

Qfa

As above Think O----O----O etc One after the other. Most manufacturers do it for keypads and expanders. Some do it for detection too

Of it's a hkc bell it is led. No risk of high voltage from the strobe. The piezo will be though. I'm seeing a trend of people wanting to remove proper stuff and asking how it can be disabled. Never see the same questions on simplisafe and ring etc. That's because they can be easily disabled. If you want a burglar alarm that can be easily disabled just get a doorbell and hope it's pressed.