_2d2230.png)
_5a42ce.png)
james.wilson
Admin
-
Joined
-
Last visited
Everything posted by james.wilson
-
I prefer a sticker inside the lid for jumper settings for the life of the sensor
-
We use our own brand that isn't hik based. There are quite a few brands actually manufactured by hik
-
Polyprop was poor but yes polycarb is good. Back then it was self cert/true its a bit different now
-
I meant the combined I don't think the GSM only will be updated
-
If others are reading I'd suggest the coil inside the tag is broken
-
Don't beep in the detector, maybe the elite does unsure. Voltek don't either but used to fit little sounders to them
-
The newer GSM unit is 3g
-
I don't think you can, you need to fix the supervision issue as the detector probably won't work if it activated. That's the whole point of supervision alarms
-
I'd say so yes
-
Combined shock and contact
-
Arnt baluns designed for utp?
-
Always have contacts on entry door as 6wb
-
In pet areas I'd always recommend perimeter protection
-
I'll have a word!
-
It's the best I could find for the cost.
-
Agreed cca is budget stuff I'd only use copper myself
-
You definetly connected it correctly?
-
Ni cads can take a lot of abuse when I used to race model cars you could put more into them than so called fast charging today. Used to thermal charge at a stupid temp limit. Used to put the thermocouple on the pack. Ni mh was a good compromise of capacity etc but I'd go nicad on a bell if I wanted to design one
-
It wasn't lithium based back then
-
Piezo needs high voltage old school mylar cone speakers need less but require more power. I prefered the lower freq as it gives more range but looks worse on spec sheets at 1m
-
I rate the multi box sia uses them but only the g3 one
-
No one really cares about a custom bell and the client certainly doesnt
-
As 6 it's the hardest place for a component. But no reason for it not to be microprocessor based, our cars are for instance.
-
As you have I'm sure someone will be in touch
-
I don't use the gear but iirc that panel is a really basic premier. As the keypad that's been added is a prox one I think you will need to upgrade the panel which isn't a bad idea anyway
