Jump to content
Security Installer Community

james.wilson

Admin
 View Profile  See their activity

  • Posts

    30,729

  • Joined

  • Last visited

  • Days Won

    291

 Content Type 

Everything posted by james.wilson

  1. james.wilson
    It is somewhere I use it for risk assessments. Should move it to android but miss wp
  2. james.wilson
    if its a compact enclosure then yes your right
  3. james.wilson
    just to add to the above. lets hope it 'works' if its needed etc
  4. james.wilson
    assuming a 2.1 is big enough. OP the battery is sized depending on panel load
  5. james.wilson
    it shouldn't need rewiring assuming it was installed correctly. A company should test the battery at service and replace at 3-5 years anyway.
  6. james.wilson
    into one of the outputs
  7. james.wilson
    fta and set are only needed if connecting more than 1 device per circuit. the set connects to an output programmed as that and fta links the vipers together as per the manual
  8. james.wilson
    I have a fluke set but bought cheaper set. They both perform well
  9. james.wilson
    No you found all that from previous companies. It's a matter of time Imo till we will be do anything but what code you on about. You best not charge me for this etc etc
  10. james.wilson
    Also the tamper return will be pos on that panel
  11. james.wilson
    if its a small room less than the radius to all walls then yes
  12. james.wilson
    Is it a part 1 system. I'm assuming it is as it has call points on it? Are you the maintainer?
  13. james.wilson
    be cautious as the regs are huge. But yes a smoke has a radius of 7.5m and heat 5.3m but that has to cover every area. This is for part 1. I dont know the regs at all on part 6 and never work on them
  14. james.wilson
    I'd bet you have blown the output fuse
  15. james.wilson
    Iirc it depends on how many the panel supports
  16. james.wilson
    ok vanderbilt spc
  17. james.wilson
    To extend, any panel pretty much will do work with your sensors. But if you wanted to know a recommendation as to the easiest to use panel that can also do xy and z etc etc
  18. james.wilson
    It's not as simple as that. Think of the question, what's the best car?
  19. james.wilson
    Agreed but if the foil was no longer available it couldn't be used. I see that old stuff worked well and this is a prime example that it was. But i assume 6 your not using tsi via a modem or a direct leased line etc. Times change and I think pstn for anything is past it least of all something possibly important
  20. james.wilson
    Will pstn be like pressure mats, ultrasonic, foil, tube and wire etc etc. I'm sure the same debates existed. Even csl know pstn is passed it I've never known a time it did
  21. james.wilson
    I'd say test phones are not needed anymore and even less so going forward. Was useful in the old days I haven't carried one in years. Downside is I need to workout what's going in its cutout place in the case
  22. james.wilson
    Installed no
  23. james.wilson
    Agreed the euro mini has positives but few optimas or accentas fail. I'd put an xm6 up against pretty much anything else for longevity Mr h isn't a panel snob, he made me accept the Premier was a decent panel
  24. james.wilson
    Don't see any issues with the accentas etc. Sia have loads of optimas still supported
  25. james.wilson
    Fuses tend to blow for a reason tho
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept