_2d2230.png)
_5a42ce.png)
james.wilson
Admin
-
Joined
-
Last visited
Everything posted by james.wilson
-
It's the best I could find for the cost.
-
Agreed cca is budget stuff I'd only use copper myself
-
You definetly connected it correctly?
-
Ni cads can take a lot of abuse when I used to race model cars you could put more into them than so called fast charging today. Used to thermal charge at a stupid temp limit. Used to put the thermocouple on the pack. Ni mh was a good compromise of capacity etc but I'd go nicad on a bell if I wanted to design one
-
It wasn't lithium based back then
-
Piezo needs high voltage old school mylar cone speakers need less but require more power. I prefered the lower freq as it gives more range but looks worse on spec sheets at 1m
-
I rate the multi box sia uses them but only the g3 one
-
No one really cares about a custom bell and the client certainly doesnt
-
As 6 it's the hardest place for a component. But no reason for it not to be microprocessor based, our cars are for instance.
-
As you have I'm sure someone will be in touch
-
I don't use the gear but iirc that panel is a really basic premier. As the keypad that's been added is a prox one I think you will need to upgrade the panel which isn't a bad idea anyway
-
Yes but becareful of the predrilled hole size of the dclip. Also can use plclips without predrilled holes when hidden. I was also meaning for other cable types Most of the clips are plastic however I think the 800 replaced the above
-
Agreed on the d line. Also use a spit nailer for speed with pirelli clips
-
What does the socket look like?
-
Hello and welcome I'd go with the notification option re 2 sabs but could be remotely powered or no internal
-
-
Thanks I was curious as I assumed wireless. Wonder how this will go with newer systems supported by a maint contract?
-
The leds not flashing says to me Sab tamper not closed
-
What will you replace it with?
-
I'd say your issue isn't Paxton related then. Is your relay stable from the alarm I'm assuming it isnt
-
I belive if you complain to the council they change something. I'd love to know what they do.
-
Don't know the panel you may be able to program them as double pole
-
Did you link out with cable or the relevant resistor?
-
im wondering if you have a bad connection on the plug/pcb/relay on the connection link it at the Paxton to see if the messages stop and work back from there to identify where its coming from
-
It looks like it's continually arming etc. What's the relay state and what if you link the input
