al-yeti
-
Posts
9,150 -
Joined
-
Last visited
-
Days Won
117
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Everything posted by al-yeti
-
After all this time I just noticed the new content tab, flaffing around otherwise! Good tool!
-
Don't understand what your saying, I thought shocks were already installed and you only wanted to add a door contact? If your not willing to mess with the panel but willing to mess with programming you may aswell Buzz through a pair and stick door contact on that Also you need to know what panel you have , "think" means guessing and any advice could be wrong To be honest programming can get confusing , get engineer? At least get a quote ?
-
Night school? We used to call it "evening classes
-
Daisy chain as in series yes, but if sol isn't there enough zones or pairs to give an additional circuit?
-
I think your a one man band like me, come on admit it?
-
joe public must read this stuff and wonder what you lot are on sometimes lol
-
while your on this subject, whats a light weight sds, my 24v bosch weighs a ton when up a ladder! what you got?
-
I in a diff country , but same island as you lot !
-
I thought competant was limited to your own property?
-
Galaxy 2-44 +Batt Mis 0001 Problems
al-yeti replied to Mickthedick's topic in Control Panels (Public)
What makes you think it's still mains, you said you fitted a spike filter? So in theory it can't spike Intermittent suggests as above the pcb, or loose battery terminals perhaps could be something simple..... -
So then no gf
-
Are you see! Your not just bunch of Muppets Your helpful clever fraggles! Just joking of course , that did the trick by the way weird little pannel or ribbon I should say thanks
-
Wouldn't the older portal work ? If all that's needed is a particular sensor?
-
Ok now that's totally confused me easily done to So if you must have a qual how does grandad rights fit in?
-
I thought he's newbie learning the trade, he has good questions, who else better to answer them , yes you lot!
-
Any dual Tec pir
-
Hi, is there a fix for the onboard keypad, has a small ribbon type board flat thing whatever u call it, moving it seems to allow buttons to work
-
Lol wondered what that meant!
-
New House - Which Alarm And How To Run Cabling
al-yeti replied to ibruceuk's topic in !!..DIY Installers..!!
Or put the pir at door frame height rather than ceiling height depends on how it looks, if you have spindles I found pets trigger pir as they go up, if no spindles and just a wall going up stairs then should be no problem -
What are you planning to connect to the 2amp psu? Everuthing else will have the main system battery as backup in mains fail , if psu goes down whatever is on it will go down Hence as 6w says PSU200XP which has room for batteries, or something similar if you keep ur existing expanders a psu with an alarm output and battery back or something like that perhaps
-
New House - Which Alarm And How To Run Cabling
al-yeti replied to ibruceuk's topic in !!..DIY Installers..!!
Depends how you run them, as for "horrid cables" complete nonsense Op go wired where ever possible and wireless only if really have to -
no eeaky spenglish
-
Cat5 305m box most cost effective