Networks

https://nvd.nist.gov/vuln/search

What do you use? Cat 5 Ta

alarm not ringing out after nbn installed. and when I just tested it my internet stopped working.

Hi all I have a real strange one here, my son has a samsund 1630d dvr which 3 people with iphones can connect to on a local ip and through 4g network ok, my sons iphone can connect local but not 4g to his 1630d he can connect to my 1673d no problem on 4g,I hope this makes sense, any questions please. also i have reloaded the ipolis app to his iphone and also checked the settings many times settings on the app many times. thanks bj

Hi all I have had a few replies to my other post re access points, can anyone please recommend any good ones that can be wired to a netgear 8 way switch which is in another room from my router. many thanks. bj

Hi can anyone help on this problem my son in law has his talk talk router in his office, the signal in the kitchen extension ( other side of house) is rubbish with wifi boosters, but he has a cat5 cable from the router in the office to a netgear 8 way switch in the kitchen which he uses for the tv and other equipment. What we are trying to find out is there any sort of kit that can be fitted on the network cable at the switch end to boost the signal. I did hear once that you could use another router connected to the cat5 cable and use that as a wifi booster is that so. many thanks. bjj

Slipstream exploit published this week allows an attacker to access any TCP/UDP service bypassing any NAT or firewall by just visiting a website with some malicious javascript.

Sheffield ANPR Cameras accessible via IP with no password. https://www.theregister.co.uk/2020/04/28/anpr_sheffield_council/ Lawyers are passing it of as user error be an interesting watch to see how that case goes.

https://www.bbc.co.uk/programmes/b0b50191 Worth a watch if you haven't already, most will be common knowledge to trade members here. Example of hacking a smart home with interesting use of exploiting Alexa via a smart TV. Highlighting the issue with keyless entry for cars. Baby monitors and CCTV streaming sites and Secure by Design code of practice.

hi im after a network scanning tool or app that can show all devices connected to a switch or router , even if its a different ip range .eg say im using 192.168.1.1-255 but the device might be 192.168.0.1 or something different i have removed some ip cameras and trying to get in to them as dont know make or ip settings, they are only basic eye ball cameras

Make sure you keep an eye out for software updates as they are rolled out for all platforms. https://www.armis.com/blueborne/

What you need to increase your company profile in the age of the botnet is... https://vulnsec.com/2016/netgear-router-rce/ https://www.kb.cert.org/vuls/id/582384

http://securityaffairs.co/wordpress/51640/cyber-crime/tbps-ddos-attack.html

Just seen an interesting white paper on studies that have shown you can be identified by your interaction with WiFi signals. http://arxiv.org/pdf/1608.03430v1.pdf If you don't care for reading a white paper the overview is this maybe useful for smart homes of the future and has potential for domestic intruder detection. Will need a fair bit of work before it could be used but the concept could see the end of the movement sensors and domestic security as we know it.

Evening gents, Bit of a strange one, but hopefully someone can help. Got a site we've just installed CCTV on and the customer wants remote access. The NVR is on the internal network OK. When trying to set up the ports, I noted the WAN IP of the Draytek had a local address, and on further investigation it seems as though the customer's internal network goes through two routers. The broadband comes in through the Infinity modem, goes into a Cisco router which then goes into a Draytek Vigor 2860 router, to which our CCTV is connected (via a 4 port switch off the PC next to the NVR 80 metres away). I thought it might be a bit of a long shot, but I've tried to forward port…