al-yeti

D connector?

Some Windows are made like that, even wickes Windows

Talk talk are still nutts

We can't give that info out But it seems when you disconnected your sensors you havnt connected them back correctly As said "above" you have problems with zones 2-7 possibly If you didn't mess with wiring in control panel that should be ok But zone 1 is a door contact yes? So won't help you to wire the pirs Each pir will have a negative and positive sometimes it's red and black sometimes it isn't , but if your saying in the panel all of them are connected to +'ve then you need to check what you did in your pits again Why don't you load some pictures of each pir here ?

Bipper another one easy to get into the back , they punch a hole into door below handle takes them a few seconds

I see some couriers have notices saying cctv and audio being recorded for security reasons, all within there area of course , not sure if they do record though

I thought fire is unregulated meaning there's no real rules or law to stop anyone doing anything except you follow a British standard , after that if you want insurance to except it they will want a level of installation according to the bs standard and some say nsi or ssaib Intruder you can connect what you want if no certs needed even councils around here give multi tenancy licenses based upon visual inspection a receipt to say its installed and your done Or you will get done lol And some star trek acico stuff! Or did I read that wrong?

Better go through all the presets

So you can make it move? But not bring up menu???

Few I have done I always put a camera at back of garden looking at house as well as one pointing to rear you should consider that

Look at HIK vision instead used by many here and give them good results

Well app is free , but don't see many using the user software for dimensions

What desktop software?

Eh? So no tamper switches work in sounder This way?

Yes if you link back does it all work fine on the panel and if wife up and link at bell ends does it clear the tamper? Meant wire up not wife up lol

If you loop the tamper on the panel does it clear? then reconnect wires at panel and loop at sounder end without sounder connected does it clear?

You could have bought one from the u.s by now ? I doubt your going to get it cheap here either....

Widely available in Ireland so you should be able to get support there

hi Do you have all the codes , ie engineers code? Without it you can't do it , you would have to default the panel and start again I assume your in Ireland?

He said speech dialler ok? Unless he meant gsm as you said

I know, hence I asked if it has to be gsm .... Or I meant gsm but said sms ....

Can we external link here? I pm you just in case not Although https://www.securitywarehouse.co.uk/catalog/honeywell-ade-informa-speech-dialler-p-1425.html

Does it have to be sms type?

Pricey , you could save 30quid and get something cheaper

Put it on a bench if it works then your problem is the cable or how your mounting it If it doesn't work then maybe you shorted something on the bell Rear switch is just another tamper switch if it has one , you will seen it unless it's the same switch which rests on wall and gets pushed down by the screws or lid on some boxes