al-yeti

Secret society not sure how I got in felt sorry for me, discountrus

You just solder dodgy lol

Not all resins protect electronics there some made to conduct electricity , packet would have said normally or data sheet

Odd y shape plastics were for separating fibres to diff trays not that is of much use to know lol

I think you should go buy a g2-12 galaxy or a texecom perhaps buy kit perhaps from Www.securitywarehouse.co.uk Try and play with panel it's menus it's functionality for a good few weeks so your confident in what it can do Only issue is doing that still won't teach you to fault find and deal with any special functions Perhaps take in in house jobs which are basic quotes and as you go along you may get asked to do something special Security warehouse do plenty of kits and cheaper than most places G will confirm that I am sure!

You could in theory take the relay output to signal another input in the dialler but the dialler has to be able to recognise both inputs are activated to play you both messages that you record instead of just one Not so diy but depends on your knowledge of circuit s etc

What dialler and pir are you using

That part you could swap out from any old alarm unit or make something up ie fuse

Ah there you are! GG

That's for keypad not the key fob

Pa set to silent? Enable bells for it Etc

1000tvl normally Interesting point though what will get processed 1000? 700? Or only some dvrs will do it

Apparently new mods are funding it, read your small print

26k ok for part time tho

Thought texecom webway issues were resolved?

How often are silent pa requested for police response? Is it insurance related or something dependant on a risk assessment Or are most pa on audible aswell as response

Yello!

Now that's funny I thought my typos were bad!

City link mash all the parcels around here , glad sw uses interlink etc

Ah sorry thought you got cam from somewhere else

Could be camera then or Dvr , because analogue output does not confirm both outputs necessarily working Or it could be Dvr , this is the issue you have limited amount of equipment to test with Hopefully shop can identify problem , which shop? Maplins?

Thought they automatically switch?

Any other camera work? Or you only have one?

What's both model numbers?

So are you able to change the camera setting via the analogue? Also are you able to bring up the Dvr menu and grid on your monitor? With no cameras