Jump to content
Security Installer Community

Lwillis

Trade Full Member
 View Profile  See their activity

  • Posts

    2,615

  • Joined

  • Last visited

  • Days Won

    5

 Content Type 

Everything posted by Lwillis

  1. Lwillis
    No don't have to use the bracket. We never normally do unless they are feeling mounted
  2. Lwillis
    Just had one system go pop with the recent lightning up here.thank god
  3. Lwillis
    What analogue bit? Some of the dahua DVRs are a full tribrid (fitted them myself) and they will take HDCVI & Analoguge cameras & up to a certain amount of IP cams. Plug and play as well, the DVR will automatically sense the resolution of the input and display the image from the camera.
  4. Lwillis
    I've fitted a few HIK systems and haven't had any callbacks with faults. For now I wouldn't bother with IP and would go HD-CVI, still 1080p images and the price is usually cheaper than IP.
  5. Lwillis
    What are the extra restrictions of CVI over TVI? As far as I can see CVI give greater cable runs, also offers recording in 1080p can be run on cat 5 or rg59 SDI seems like the one with more issues (from experiance) than CVI. Although I have not use TVI.
  6. Lwillis
    CVI can handle longer cable runs than SDI without repeaters or loss of image quality.
  7. Lwillis
    I've ground quite fond of these after fitting a few of late. Not had any major issues with them!
  8. Lwillis
    That panel is obsolete now as has been for a while. I'd reccomend contacting a local approved company and getting it serviced. It will most likely require a new standby battery.
  9. Lwillis
    Run 1 8core to each device. And screened cable to the keypad. Extra cable from panel into loft space. And run one into garage for keypad
  10. Lwillis
    You'll need to check the trigger type for the dialler It probably -ve trigger so connect it to a programmable output an program a intruder or the bell -ve trigger
  11. Lwillis
    The viper, with the led on is the zone clear?
  12. Lwillis
    You need to drop the power to it for a few seconds before setting, we used to fit a n/c button on the bottom of the panel or adj the rkp.
  13. Lwillis
    Not sure on the older ones but if you go into zones it will give you the option of zones or rf zones.
  14. Lwillis
    christ, at a previous firm we were issued with a small 3 tred pair of domestic steps, for the house bashing stuff, instead of using the fiberglass ones. id just stand on a chair TBH lol
  15. Lwillis
    I'm going to go to work tomorrow, bell my boss to FO and I want a cherry picker on every job because the ladders aren't safe. Can't use a pair if snips incase I cut myself. Or enter people houses incase I get a splinter from the cupboard door the panels in .
  16. Lwillis
    Well I could have climbed up the ladders and stepped off them onto the roof, but the window was an easier option. So has nobody here taken any risks in their entire career? I'm not saying id Hanging off some tray and fit a camera but calculated low risk IMO tasks are okay.
  17. Lwillis
    Wasn't that bad of a pitch, I'd say falling from ladders would have been worse. Grass isn't allways greener , especially when people bull **** you in the interview!!
  18. Lwillis
    My first call tomorrow is booked for 9am (well between 9-12) in penrith. I'm on the coast near Newcastle upon Tyne. So about a 2hr drive to get to site. I could potentially get a call at 6am be out for 3 hours. Which would mean I'm pushing back jobs and won't get in until late and will miss appointment times. As others have said its not ideal but it's a means to a way. Climbed out of a bedroom window the other day and stood on a small pitched roof to replace a Bell. ( longest laddders wouldn't reach over the small extension). Wouldn't get a cheery picker in either. I decided the risk was okay to do it.
  19. Lwillis
    That rule Wouldn't work for me. Last place I worked at had the rest time but I usually ended up going in for 9 anyway.
  20. Lwillis
    How does that work if you have a call booked for 9am? Just cancel it? If no other engineers are avliable that is?
  21. Lwillis
    Yeah was only kidding, I'd have to check my contract if it's in there, but tbh I don't get that many calls and quite enjoy the peace being away from the missus on calls lol.
  22. Lwillis
    Rest time? Lol what's that??
  23. Lwillis
    Call out at 3am , non stop all day since, finished at 6. And then had to take to toilet to bits to see why it's not flushing. Best day ever.
  24. Lwillis
    Just released what I wrote was a load of ********. Sod it off to bed.
  25. Lwillis
    1k across tamper, From one side of tamper into 1 side of alarm Out of empty alarm back to panel Aux + Aux- Is the shock self resetting? The older ones wernt. And used to have to fit a normally closed push button on the panel to drop the power for a second for it to reset.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept