Lwillis

Just watch for output 1 inverting when you go into output test. It wont clear until you exit engineering

Fit an external prox reader on the videofied and ur fobs to set and unset that Or fit a proper CCTV system and use forced door from Paxton or line detection etc onto the NVR Alarm input to generate the alarms

The PIR going red is because it’s seen movement those have a red LED in them , some have BLUE leds. Contact a local alarm Co. for assistance

Not without replacing the domes with TVI stuff

Could you post a screen shot of the footage?

Aye apparentley it’s the dogs ******** but I’ve never seen one in a decent working order for about 7/8 years now.

Surely nobody is still fitting these? Didn’t think any of them would be on clients phones for remote viewing. The live images are shocking never mind trying to view one remotely...

The metal pins inside the glass tube just doesn’t Spring back. Replace the contacts job done

It's been in about a year I think.... maybe less can't have 0 in the code -Wife won't use system due to that and doesn't want a fob wont take 1k/1k EOLs without fitting extra resistors in the panel Redecorating throughout so fitting a more cosmetically friendly rkp

Sounds like a plan to me Isnt locked but will need defaulting

I'm ripping out a 1070 at the weekend if anyone want it otherwise it's going in the bin.

Yea fit them day in day out and have no issues.

False alarms mainly ripped a load out in a warehouse and went back to pyronix

Had nothing but issues with those Honeywell detectors the older ones were better IMO.

Guessing by your area i might know the alarm co in question. PM me if you get stuck.

Bit much for a domestic or small commercial tho

You can but cant disable restores on a G2. Ask EMCS to setup the restores as non filtering and to abort on Open.

Get the arc to make the restores non filtering

Could be a few things as above check the psu,bnc ends is it copper cable or the chepo stuff?

How are they wired? Cat5 with balauns or shotgun?

I Normally for the 064 didn't think they did the other ones anymore there used to be a NON Prox version for the Euro mini .

Never took that much notice what variant they were if I'm honest mate.

I'm sure you could change the banner on the 9651- option 183-IIRC. Havent done one in a while tho

Not sure the information is in the manual unless you already have the engineer code. As above we cannot give out defaulting information here.

Agree with James, I'd recommend taking out an annual maintenance contract and have the system serviced regularly, this is more important on wirefree systems.