Everything posted by Lwillis
-
Deltabell modules
Yes both modules fit same backplate and cover Delta x is for use with a light plate that plugs into PCB and sticks in the lid Delta plus has built in LED on module
-
has hik purchased paxton
A few years ago I spent a week or so goin around flashing HIK DVRS after an apparent hacking attack. Everything be hacked tho If someone wants to bad enough.
-
Chaps - Help the uneducated and ignorant
Pyronix app will work via CSL Gemini.
-
Engineer required -North East
Pm'd you mate
-
Engineer required -North East
We are looking for an experienced engineer to join our team. Competitive salary and the usual benefits (Phone van laptop/tablet etc) Get in touch for more info!
-
Leaflet Advertising
Anyone care to share their leaflet ? Looking for ideas for mine
-
Smoke detector
Surely if your working in a fire alarm maint dept you should have the knowledge and experience to not be asking this question. which Honeywell panel is it?
-
Has something happened to the forum layout?
-
Has something happened to the forum layout?
iphone . was fine before the update tho seems okay on the laptop!
-
Has something happened to the forum layout?
no worries then. its almost unusable on my phone at the moment
-
Has something happened to the forum layout?
both mate, seems to load slower than the old one aswell.
-
Decent Boots
I've got some hightop scruffs, really comfy aswell
- Resetting Engineer & Grandmaster Codes On Risco Agility 3
-
Pyronix Kx15Dt Spares
No don't have to use the bracket. We never normally do unless they are feeling mounted
-
End Of Id
Just had one system go pop with the recent lightning up here.thank god
-
Ip Cctv Cameras
I've fitted a few HIK systems and haven't had any callbacks with faults. For now I wouldn't bother with IP and would go HD-CVI, still 1080p images and the price is usually cheaper than IP.
-
Optima XL6 manual needed
That panel is obsolete now as has been for a while. I'd reccomend contacting a local approved company and getting it serviced. It will most likely require a new standby battery.
-
Texecom Premier Elite Dialler Connection
You'll need to check the trigger type for the dialler It probably -ve trigger so connect it to a programmable output an program a intruder or the bell -ve trigger
- Switching Pir To Viper Glx Shock - Wiring Advice - Galaxy G2-20
-
Switching Pir To Viper Glx Shock - Wiring Advice - Galaxy G2-20
You need to drop the power to it for a few seconds before setting, we used to fit a n/c button on the bottom of the panel or adj the rkp.
-
Galaxy Rf Portal
Not sure on the older ones but if you go into zones it will give you the option of zones or rf zones.
-
Switching Pir To Viper Glx Shock - Wiring Advice - Galaxy G2-20
christ, at a previous firm we were issued with a small 3 tred pair of domestic steps, for the house bashing stuff, instead of using the fiberglass ones. id just stand on a chair TBH lol
-
Switching Pir To Viper Glx Shock - Wiring Advice - Galaxy G2-20
I'm going to go to work tomorrow, bell my boss to FO and I want a cherry picker on every job because the ladders aren't safe. Can't use a pair if snips incase I cut myself. Or enter people houses incase I get a splinter from the cupboard door the panels in .
-
Switching Pir To Viper Glx Shock - Wiring Advice - Galaxy G2-20
Well I could have climbed up the ladders and stepped off them onto the roof, but the window was an easier option. So has nobody here taken any risks in their entire career? I'm not saying id Hanging off some tray and fit a camera but calculated low risk IMO tasks are okay.
-
Switching Pir To Viper Glx Shock - Wiring Advice - Galaxy G2-20
Wasn't that bad of a pitch, I'd say falling from ladders would have been worse. Grass isn't allways greener , especially when people bull **** you in the interview!!