Everything posted by PeterJames
-
Disabling my alarm -help.
Your suggesting something that hasnt been invented and we as a forum have limited control over, also if someone entered that code by mistake it would be bye bye alarm
-
Disabling my alarm -help.
Wanting something we cant give, you wouldnt have known without asking
-
Disabling my alarm -help.
If the customer had the engineer code from the start, you move liability of the system working as it should to the customer. No insurance company will ever accept it because there is always going to be the worry that the customer deciding to meddle with the system themselves when say they want to move a detector due to decorating. They go into engineer and unwittingly they reprogram the system so that it doesnt work in the event of a burglary. What do you think they will do when they are burgled and the alarm didnt work? I can hear my customers now saying "I have been paying all that money each year and the system didnt work when I was broken into, my insurance wont pay out so what are you going to do about it?" Then from the engineers point of veiw, I know that I would not feel happy being the last person to service an alarm system knowing full well that the customer has the ability to faff around in engineer mode after I have gone. The last engineer on site could get accused of sabotaging the alarm system (inside job) if a customer defaulted zones unwittingly then a burglary was to happen. As others have tried to point out, when you buy a security system, you are not just buying a few items that someone screws to the wall, you are buying an assurance that it will do what it was intended to do. Anyone can screw bits to the wall, programming and testing it to work correctly and understanding how the programming works is another matter. If you want to know the engineer code of your alarm, fit it yourself or use a non accredited company to install it, you wont have anyone to sue if it fails to operate, but when you decide to get rid of it you wont have this problem. Anyway all of this is by the by as you have a man with a hammer coming to sort it for you. Have you told your insurer that you no longer have an alarm btw?
-
Disabling my alarm -help.
The problem is in order to wipe it, or do anything to it they have to send someone to site, and they dont have engineers that work for nothing, nor vehicles that do not require any fuel or maintenance to get the engineer to your property, or any admin staff that work for free to organise it, and so on. To have engineer codes per customer would be a real ball ache, we have all thought about this over the years a code based on postcode or customer number. The thing here is, if this was the case and ADT gave out engineer codes to customers when they canceled their contracts it would not be long before the method of how the codes are generated is worked out, leaving all ADT customer vulnerable. ADT have a responsibility for all their customer, and less so for the ones that leave (they are no longer a customer) Later panels can be programmed remotely and panels can be defaulted remotely, but this is a fairly new development, and probably not available when your panel was installed. ADT are not try to scam you, they are protecting their customers, and you are welcome to pay someone else to disable it, or try to disable it yourself, or just leave it where it is and not use it
-
Hello everyone.
Hi and welcome
-
HI
Bonus dayus and welcome!
-
Texecom Ricochet wont arm
Tell the engineer that you know it and he will change it, we all have more than one engineer code. Good to know that they are 24/7
-
Texecom Ricochet wont arm
All approved security companies operate 24/7, if yours doesn't then he wont be approved, which means your not insured anyway. Mind you if he has given you the engineer code lets hope he has good insurance.
-
Texecom Odyssey 1 Bell Box
is there a 5 sec battery link on these boxes?
-
New home with an ADT alarm
QFA plus ADT often dont provide a real bell its normally a decoy outside. ADT prefer you to take up their monitoring
-
Visonic Powermax + False Alarms / No Memory
- replacing an old scantronics 9800 with what?
Where you looking to DIY or get a company in? You are correct things have moved on quite a bit since 2005. There are intruder systems that you can add cameras to but it is better to keep the two thing separate. CCTV wise there are AI cameras that notify you on your smart phone if a human is detected (yes it ignores cats foxes and trees blowing in the wind) Intruder wise again there are hybrid systems that will allow you to use the existing hard wired detection coupled with additional wireless detection where required Both are available DIY but you are limited on choice, in my opinion the most reliable brands are trade only- Paradox K37 and StayD Problem
DSC I think, OP you need a Canadian forum this is a uk forum- Grade 4
Really? what do you base this on- Fun Facts
- ADT PM360r - Private Reporting menu.....
Well.... then we will know if the rumor is right or not- Hello
- ADT PM360r - Private Reporting menu.....
Ive heard if you leave it in the freezer overnight all the menu's become visible- samsung ipolis app
If he can get into your DVR then it wont be an IPhone setting its more likely an app setting- samsung ipolis app
Then its not the same problem I had, sorry I dont have the answer- samsung ipolis app
As I said its an account thing, humour me, get him to connect to his own DVR using someone else's account login. Preferably one that has proven to work on 4g- samsung ipolis app
I had similar with a different DVR it turned out to be something to do with usernames, get your son to try and connect with an account that is working on 4g- Optima 2 Plus Alarm - External Bell Box and Strobe
If only people understood the thought that has gone into the british security industry that has made it what it is today. Its no wonder that every man and his dog thinks that he can set himself up as a professional CCTV installer, the pictures look great but the important part, the recordings are useless- Eurosec CP8L Mains Fault issues
Have you check there is actually mains getting to the panel? Its unusual for a mains fuse to blow unless there was a surge when you powered up- Verkada Inc. - Hacker collective breach there full clients database including Tesla, Cloudflare via admin account.
I got good images of someone dumping a stolen car outside my old house, and caught neighbors hitting my car with theirs twice. At the old shop when those kids smashed our Window 8 years ago we identified them caught them and prosecuted them, all from the CCTV. It can be done. At the new business premises we caught a fly tipper who dumped a load of asbestos on the estate, we captured the footage of a bloke getting run over. Pikeys stealing a load of plastic pallets (ANPR) and more recently the catalytic converter thieves ANPR. The fly tipper successfully prosecuted the pikeys could not be traced, nor the cat thieves, vehicles not registered to them. We have numerous successful CCTV captures for customers CCTV set up properly works. - replacing an old scantronics 9800 with what?
Important Information
By using this site, you agree to our Terms of Use.