al-yeti

No you can use system but not the app , atleast with hkc that is the case If it's what your saying with pyronix, must be more to it aswell , op blagger perhaps

Basically get another installer , first year is free I think but you have to pay for this service , he will reset codes which is required if engineer access is not available Job done Or don't pay anything and leave it how it is

Just loop each zone , and the tamper is it looped or you wired through the zones?

Why do you have a cable pair and resistors connected in keypad?

But it's not what he saying , now it seems you don't know how to wire contact? What's happens if you place resistor across keypad terminals? What happens if you connect cable remove contact and put resistor across pair going to keypad ? What's keypad say then , as then you can follow order of fault finding if you can't test cable directly or have a meter Unless it's something to do with how you have mapped the zones

You need engineer

Needs to get server out of his bedroom

£60 can get new panel and keypad

Ideal are good Is it blue in colour? Although they have few versions older ones were good

Take the vat off and you got a deal , cash

On a hijack note Customer of mine was burgled yesterday, forced entry smashed kitchen window to open opener , kitchen PIR triggered , burglar must have fell through window aswell, as he ran through house through front door without touching a thing , internal sounder is aloud lunatic so assume it bothered him Thing is the customer was glad he paid for the kitchen PIR to be fixed because they tried to DIY it a month ago , but decided what if it doesn't work They going for perimeter detection now on the rear I keep internal sounder full 20mins and external sometimes 10mins depending on where it is ,internal sounder is important more so than the external These days ,allot of burglaries are day time lunch time entries These guys had some cheap CCTV , woman walks to door with note pad , rings bell, signals no answer no one at home with her hands and guy with hoody and tracksuit walks over from somewhere jumps over fence Customer didn't realise rear cameras are not recording ,but that's maintenance issue on a DIY camera install...

Hardcore He's got good staff all on the ball, so stays in bed , nothing else to do , probably goes to IKEA and decides what bed he is buying next

Your room must be like junk yard , growing up mine was a mess still don't have time to fix everything

He needs to do some work

Stick around there bigger blaggers than me.......

Yes but you use the word modern , give the modern tech back and buy something older ? Point is better to update , it's only natural you humans try and save money like us aliens

£800-£1k would get you a good system and you won't have to worry for years

Hardcore lol Depends how much you value your security , I would scrap it and get new system in , although many wait for there CAMBELT to snap aswell

Some old bells ring like lunatics, as if they getting power from the grid......

Need to scrap it and put a cheap replacement in

Proffessional blagger ?

How come your not in trade yet? There's ways to blag your way in stuff your good at Need to do your head in the dark side

Nah I just lazy on labelling , first fix hardly ever label , I see some IT guys doing there second fix , swearing about the first fix with nothing labelled ,but none of them carry the probe they don't even know how to buzz them out ,although if you have 100cat5 and looking for only one it will take them some time without a tone tester

As a house basher I use it often , even the odd commercial job that I don't bother labelling I need it lol