Jump to content
Security Installer Community

The Best Exit Terminator Switch In The World... EVER!


Recommended Posts

So in my bundle of crap that some poor guy was no doubt delighted to offload AND get paid for it, there was this DA product, which I never knew existed...

 

DSC_1727.thumb.JPG.de36c60ed80f64459396a2e8b01d1bf8.JPG

 

What's special about it is that its got it's own miniature speaker so you can hear the tones from outside - I've never seen that before.

 

And that's about it really.

 

DSC_1728.thumb.JPG.6189fb18130fae367aca510ed84e4dee.JPG

DSC_1729.thumb.JPG.4269e8a66a64db21d32157ade94ce1ba.JPG

DSC_1730.thumb.JPG.2def88e001e4c32ba80d1ac1147c02c8.JPG

DSC_1731.thumb.JPG.75cdea06b96d65080175d5215e9a84ab.JPG

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Link to comment
Share on other sites

38 minutes ago, sixwheeledbeast said:

What was the type that had no button you just needed something ferrous to trigger the switch?

Yup, hex used them. white round ones.

Nothing is foolproof to a sufficiently talented fool.


Link to comment
Share on other sites

3 hours ago, datadiffusion said:

So in my bundle of crap that some poor guy was no doubt delighted to offload AND get paid for it, there was this DA product, which I never knew existed...

 

DSC_1727.thumb.JPG.de36c60ed80f64459396a2e8b01d1bf8.JPG

 

What's special about it is that its got it's own miniature speaker so you can hear the tones from outside - I've never seen that before.

 

And that's about it really.

 

DSC_1728.thumb.JPG.6189fb18130fae367aca510ed84e4dee.JPG

DSC_1729.thumb.JPG.4269e8a66a64db21d32157ade94ce1ba.JPG

DSC_1730.thumb.JPG.2def88e001e4c32ba80d1ac1147c02c8.JPG

DSC_1731.thumb.JPG.75cdea06b96d65080175d5215e9a84ab.JPG

 

Yeah, the one on our unit has a buzzer in it (excuse the dust)

 

qj0Lu0JW5aR2od2HoedznfUa4Yujp6ZE_C7vE46OppnSjkDIyuW1-P9dyvk-AGAVM2YaTQNd7n9fJPbCJlKnf1u--7ZqJfpLqm06GsUp5gj1EOmd4qngWZEG7JXnCH1k3MCNHw9bV1CloZvWCFZcH3pdeo9LsCz05wWmzK5d5HklrRGDpkE4gBeZBfEwXRc-kiAOgIQWvNrVN7svDIEAGqTQQihHUPEjkQcONwm1huZgsuI4_p58uj2xFuskxXyI-gNzCmsQjxJlR2paVpWOnQ-Qu8EsdmXDolttduPK2VDNQuh4AidXhagXCMPf2xY8ZSQ5C0KDGJIkRqq5v7gPLuZnma1FbdCPRvPSPYSNDaqnNMsqTjPFXPKARmH4mmEJS_fZkPOxCVkisxq29EldINzg_4AxbzBGkwjoRcuUb_5OBp9BSt8kSqedIxQJp6HoXKG3wojrV9gYdb5-8iYGN_tHrk5V7Y9Jr3Mvvv1ZU0tbjRYXk13ba4wB3qjKUPHvDsbjjU8xaEYRXSRNTB63lOJZpjPWyHJSWSYQNv43pGMC2qYD5TM4GydtAtq2VUMaeJZNZiIZmaEPEq7MFLsdhhacDiLjMdNb8-vikg63A5WiHOGBD_fDrP1wYUTRFicnIssP11mYlbeML0cotcYQXychU4riC-Me=w689-h919-no

Nothing is foolproof to a sufficiently talented fool.


Link to comment
Share on other sites

1 hour ago, sixwheeledbeast said:

What was the type that had no button you just needed something ferrous to trigger the switch?

 

Elmdene did one too, I've got one here without the 'key', no idea why I keep it on stock.

I had an 'exit terminate' parts bin sort out today amongst other things (30kg of stuff to Logan :) )

 

5 x Elmdene ET's with the 12V red led

1 x Elmdene magnetic ET

One small type Arnie

One large arnie

One Knights surface keyswitch (not really ET but sort of feels like the right bin)

5 x chinktat but look nice ET buttons on flush stainless plates (this was leftovers for a posh Bath flats job, all monitored by the 24/7 concierge, AFIAK since we never went back the concierge is long gone...)

 

Can't imagine using any of them in a hurry :)

 

 

1 hour ago, james.wilson said:

 

It's not a buzzer though, it's an actual speaker, I've seen buzzers loads, but not a tone speaker....

 

It could even be a talking ET if you connected it to an SPC!

Edited by datadiffusion

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Link to comment
Share on other sites

42 minutes ago, datadiffusion said:

 

Elmdene did one too, I've got one here without the 'key', no idea why I keep it on stock.

I had an 'exit terminate' parts bin sort out today amongst other things (30kg of stuff to Logan :) )

 

5 x Elmdene ET's with the 12V red led

1 x Elmdene magnetic ET

One small type Arnie

One large arnie

One Knights surface keyswitch (not really ET but sort of feels like the right bin)

5 x chinktat but look nice ET buttons on flush stainless plates (this was leftovers for a posh Bath flats job, all monitored by the 24/7 concierge, AFIAK since we never went back the concierge is long gone...)

 

I think I've a dantech exit terminate button on stock....

Mr😀 Veritas God

Link to comment
Share on other sites

Used their relays a few times, and those tampered alarm wire to armoured boxes they sell, you could make your own but buying theirs is much easier!

 

https://www.dantech.uk.com/DA318.html

 

Though, I like the way they obviously have about 20 years stock of old-shape MK metalclad boxes to get through before they move on to the modern ones!

Edited by datadiffusion

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Link to comment
Share on other sites

7 hours ago, datadiffusion said:

So in my bundle of **** that some poor guy was no doubt delighted to offload AND get paid for it, there was this DA product, which I never knew existed...

 

DSC_1727.thumb.JPG.de36c60ed80f64459396a2e8b01d1bf8.JPG

 

What's special about it is that its got it's own miniature speaker so you can hear the tones from outside - I've never seen that before.

 

And that's about it really.

 

DSC_1728.thumb.JPG.6189fb18130fae367aca510ed84e4dee.JPG

DSC_1729.thumb.JPG.4269e8a66a64db21d32157ade94ce1ba.JPG

DSC_1730.thumb.JPG.2def88e001e4c32ba80d1ac1147c02c8.JPG

DSC_1731.thumb.JPG.75cdea06b96d65080175d5215e9a84ab.JPG

Another one that didn't get out much 

Link to comment
Share on other sites

Those DA buttons were good, Id forgotten all about them till now, brings memories flooding back running a 12 core to a speaker to pick up the keypad door contact and ET switch 6 for the RKP 2 for the ET 4 for the MC, the speaker sound and the ET soud wer all wired from two of the terminals of the RKP. It was okay doing this for commercials but a bugger to hide the cables for resi

  • Like 1
Link to comment
Share on other sites

1 hour ago, PeterJames said:

I always found it weird that the 9800 was the LED older panel and the 9600 was the lcd newer panel but the 9100 was the oldest panel. 

Isn't scantronics still weird? 

Link to comment
Share on other sites

9 hours ago, al-yeti said:

Isn't scantronics still weird? 

 

Scantronic is dead, all hail Eaton :(

 

10 hours ago, PeterJames said:

I always found it weird that the 9800 was the LED older panel and the 9600 was the lcd newer panel but the 9100 was the oldest panel.

 

I wonder if the whole affordability of LCDs caught them a little by surprise but someone in marketing didn't like the sound of 9900!

 

I had what I think was a prototype Mosaic RKP once (in a 9610 type keypad enclosure) which I think had the part number 91000 or something, it looked odd and obviously got totally changed for the main production.

So, I've decided to take my work back underground.... to stop it falling into the wrong hands

 

Link to comment
Share on other sites

1 hour ago, datadiffusion said:

 

Scantronic is dead, all hail Eaton :(

 

 

I wonder if the whole affordability of LCDs caught them a little by surprise but someone in marketing didn't like the sound of 9900!

 

I had what I think was a prototype Mosaic RKP once (in a 9610 type keypad enclosure) which I think had the part number 91000 or something, it looked odd and obviously got totally changed for the main production.

Well they took a bit longer than Bosch did to da invuess

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.