PSE

Yes, that's the compliant way to do it. With you already mentioning a separate PSU, That's why I said go for 2x 10Ah. The 10Ah's are what we majority use in Elite's & PSU200XP Expanders. Not had a duff one yet, You will also need bigger crimps on battery leads.

All dependant on power consumption as stated above, We don't use 17ah, they always fail too early Use 2x Yuasa/Genesis 10ah instead of 2x7ah, they are same footprint but slightly taller Failure rate is massive lower than 17/18ah, within a short time they do drop to 11-13ah or less.

Ooh, Gone in dry on that one

There is a clear level of lacking on both basic industry and technical knowledge Sorry but Its got bad news written all over it. We all started somewhere, but wow

I have to ask, but is this for real... Seriously or some kind of wind up

If you've got no TX /RX LED's then the Panel processor has gone This will also occur if you plug on a RM8 relay module without powering the panel down. It blows the panel

Toughbook CF or ToughPad FZG1, We use both types, Very robust and reliable

Base is a good program, does what you need. Just make up or modify some of the default templates and you're away. We're SSAIB and Ive used it for nearly 4 years now, wouldn't be without it

Yeah well, for those saying there is no problem, enough said

wouldnt cost that much to be honest,

Tried to get on with 3 devices, all failed its been encountering random offline periods for about 2 month now, happens regular, easily proved with online stats

I ain't been able get onto the site for a few days, this is first time now

Hi Jim, can your guys get in touch or send me some info on this. It was discussed with Paul a while back,, thanks

Doesnt always work correctly by pressing at the exact same time, I always demonstrate to customers by keeping YES pressed in, before pressing NO

Press Yes & No,. Not Yes & Down

Shame on CSL for allowing direct to end user, Has to be said..

Yes, it's a pain in the ar$e

We spend quite a bit with Qvis/Adata No issues really, just generally shortages of stock now and then. They do have some stuff you wouldn't touch, other than that, it's ok

Premier can pulse an output

Are you really sure that its the equipment at fault, Like others, We use lots of Texecom. I don't experience this sort of issue I would recommend going through the manual again to get a clear understanding of the zone attributes and features As above, Guard access should start the entry timer when part set. Double check all other enabled options in the menu

Purely for testing purposes, Change the PIR mode from Hybrid to always awake Go through your scenario again, see if the results change This will prove your configuration setup are or hardware Remember to revert it back to Hybrid mode after

Yes you can, but you would need to buddy up with another provider to cover call outs etc

I've got around 300 or more mixed in the van, Might be time for eBay then.... Cash them in

I've had a direct account with CAME for years now, Our discount has been said to be above some wholesalers, Regarding the ZA4, I've just checked, We do pay less than my earlier post above. We do get good prices as we go through a good amount of parts.

Nothing to do with an airing cupboard, But I do have a few stories, First one, About 14 years ago I did an intruder install on a separate garage at the top of a guys garden, Routing and clipping cables around the roof timber, I disturbed a plastic Woolworths carrier bag, So I picked it up to move it. Though to myself, This does not feel quite right, I know what this is... Opened the bag, It was a loaded gun, an old one with the spinning barrel on it. Chucked it right back, did the job and said bugger all. Needless to say, Earlier this year he was charged for letter bombs and attempted murder on the news. Second one, (One I will never forget & My Favourite) Must be about 10 years ago, We did a large amount of student accommodation places with very basic intruder alarms. You go into the house, Each room is a separate persons room and shared kitchen/bath etc. Anyway, We got most of the cabling for the install but when it the external ball, We needed to get the to the front bedroom So I knocked on. I $hit you not, this young fit as bird opened the door to let us in, As we started to move a couple of items about, another girl got up from the bed, NAKED and started talking to us like it was normal. They were a pair of lesbians, There were some weird looking objects on the floor and an image that sticks in my mind of a double ender LMFAO, I'm sure we all have some great stories but these two have to be the ones I can most remember like it was yesterday