Jump to content
Security Installer Community

PSE

Trade Full Member
 View Profile  See their activity

  • Posts

    1,558

  • Joined

  • Last visited

  • Days Won

    19

 Content Type 

Everything posted by PSE

  1. PSE
    All dependant on power consumption as stated above, We don't use 17ah, they always fail too early Use 2x Yuasa/Genesis 10ah instead of 2x7ah, they are same footprint but slightly taller Failure rate is massive lower than 17/18ah, within a short time they do drop to 11-13ah or less.
  2. PSE
    Ooh, Gone in dry on that one
  3. PSE
    There is a clear level of lacking on both basic industry and technical knowledge Sorry but Its got bad news written all over it. We all started somewhere, but wow
  4. PSE
    I have to ask, but is this for real... Seriously or some kind of wind up
  5. PSE
    If you've got no TX /RX LED's then the Panel processor has gone This will also occur if you plug on a RM8 relay module without powering the panel down. It blows the panel
  6. PSE
    Toughbook CF or ToughPad FZG1, We use both types, Very robust and reliable
  7. PSE
    Base is a good program, does what you need. Just make up or modify some of the default templates and you're away. We're SSAIB and Ive used it for nearly 4 years now, wouldn't be without it
  8. PSE
    Yeah well, for those saying there is no problem, enough said
  9. PSE
    wouldnt cost that much to be honest,
  10. PSE
    Tried to get on with 3 devices, all failed its been encountering random offline periods for about 2 month now, happens regular, easily proved with online stats
  11. PSE
    I ain't been able get onto the site for a few days, this is first time now
  12. PSE
    Hi Jim, can your guys get in touch or send me some info on this. It was discussed with Paul a while back,, thanks
  13. PSE
    Doesnt always work correctly by pressing at the exact same time, I always demonstrate to customers by keeping YES pressed in, before pressing NO
  14. PSE
    Press Yes & No,. Not Yes & Down
  15. PSE
    Shame on CSL for allowing direct to end user, Has to be said..
  16. PSE
    Yes, it's a pain in the ar$e
  17. PSE
    We spend quite a bit with Qvis/Adata No issues really, just generally shortages of stock now and then. They do have some stuff you wouldn't touch, other than that, it's ok
  18. PSE
    Premier can pulse an output
  19. PSE
    Are you really sure that its the equipment at fault, Like others, We use lots of Texecom. I don't experience this sort of issue I would recommend going through the manual again to get a clear understanding of the zone attributes and features As above, Guard access should start the entry timer when part set. Double check all other enabled options in the menu
  20. PSE
    Purely for testing purposes, Change the PIR mode from Hybrid to always awake Go through your scenario again, see if the results change This will prove your configuration setup are or hardware Remember to revert it back to Hybrid mode after
  21. PSE
    Yes you can, but you would need to buddy up with another provider to cover call outs etc
  22. PSE
    Went NEC every year, wouldn't entertain London It was a stupid idea moving the event down there....
  23. PSE
    My mistake.. I thought from memory it was the opposite, Bit last time I tried once was many years ago
  24. PSE
    No
  25. PSE
    So it does, Option 54 Service Timer.... I've never used it, Don't generally use built in service timers to be honest.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept