MrHappy

doing alarms is a greater pain in the ass....

do you want to decorate a room then reinstate a 25yr old keypad ?

or.... just leave wire poking out of wall, until you've plastered, painted or wallpaper & then fit something decent ?

whoops... 1st I'd link loop at the pcb & check the new controls, if the fault reappears when the loop is put back on the panel, I'd look 1st at the devices which contain isolators, good luck

wow, that looks like proper tat....

ITS BROKEN...

being northern & poor... a £400 intercom for people to wear out or vandalise ? I'd use a normal intercom with a PSTN interface, However I'd not expect a dental surgery to operate without a reception ?

you have an anlogue line(s) on this proposed IP PBX ?

consumer products - eg an IP Phone are consumer electronics..... cheap & freely available a 0.5mm drill from screwfix is quite cheap, a medical 0.5mm drill is quite pricey...

There's different versions of same products.... If you have a picture of the PCB a popular alarm forum or whoever rebranded or manufacturered it might have be able to help

doubt it...

I'd say we'd have the correct manual for your product.... We just don't know which one suits your product w/o seeing the PCB....

IIRC xr1 is panel with on board keys x2 is panel & keypad when the ADE product changed models Senate still called there's XR You need product knowledge of ADE pcbs to you guess what your "xr"is really is There not graded & the programming makes little sense to me, I take the view that paying me an hr to program it is better spent fitting better controls

You have picture of the PCB ?

There's lot of different ade products which look the same & it gets worse when rebranded... I'd prefer to bin it off

day 48....

so not Powermax or Pyronix spelt wrong ?

if people are happy to bee paying £50+ for a jar of honey..... Then I must bee very poor

I assume they think I'm going to reply & paid for leads ?

yes, shit loads of 'em

G3 aren't a very good design, requiring prating with resistors on most controls "adjusting" the jumper by fitting a jumper on the PCB will certainly any problems with the lid expanding

probably, most which I've poached don't have the battery connected OP, Gardtec lists the parts no's as GT02083 expander KIT601MG3STU metal panel with keypad GT01152BL blue rkp however google appears to say no

I'd had few issues with this, I see lots going up & have wondered how many call back the large player get ?

eh ? the panel look like is was wired in the dark by a trainee... the pir looks like one screw, there a massive hole in the arse of it, the conductors have been poorly done, the resistors have'nt been cut down or fitted logically For me It very easy to fit your "scatsecure" sounder, 5 wires, a link wire across the pcb terminals I could order one today & it should be at yours on Wednesday However the issue will selling to the public or giving staff kit their not trained & familiar with is the length of time explaining why "xyz" doesn't work & its very rarely anything wrong with the kit

irrc app panel is no longer sold v10 is now std which includes app but you need a lancard or similar for connectivity