lymebayalarms

Clear 11 hours rest before starting work the next day. ?

Hi, PM me further information.

Howdo, Been a while since I have frequented these pages...have I missed much?! I am looking for work overseas, either EU (not getting into the whole debate!) or further afield ideally contract. Any recommendations for sites/agencies to visit? Anyone had any experiences good or bad?? Feel free to share! Thank you people!

Opener...

Think Clik now works with Xero now.

Clik would tick the boxes then.

Second that. No point complicating things as previous.

Howdo

Have you checked the UDL password is correct

Personally, I have now stopped doing any Fire with a sleeping risk now... rarely find a compliant install and have found most owners are looking at the bottom line for compliance. Seen some real gash over the last few year, 1 zone covering 9 flats on 4 floors to no services for 12 years plus... work on the opinion now that if the owner has that little respect for fire safety I am not interested. So, on that cheery note... Dont quote it with out a walk around of each site, open some panels have a look at whats what, check the paperwork on site to see what order its in....cover you **** or risk getting it ****** when you drop the soap!

Its defined by the FRA.

Residential Home - Higher Risk? If so I would say stick to quarterly if it has been defined by a FRA. Do you have much experience with fire?

Tidy looking unit, what's the cost roughly?

Missing Kiss of, prob due to poor line condition or installer has set the system up incorrectly. Dues it happen on every signal?

Remove the trigger for the hardwired. Delete the other bell and relearn when the testing is complete.

I guess you will be changing yours straight away.... #allthingsmedical

Honestly though, who wouldn't want one of these beauties screwed to your wall...it's a thing of ART!

I would offer to fit it for free to a wheelie bin of their choosing...

Perhaps ADI should take a leaf from their book!

Agreed, although I normally program via wintex so it's a tick box option

Each zone, under attributes "omit part 1 and omit part 2" will only then be active on full set.

Okay sometimes the metal doors will screw with the magnetic fields of the magnet. If you get issues cut a bit of plastic or rubber to sit between the magnet and the door. If you cut it to the same shape as the magnet you should hardly see it, esp if it's white.

I always bin the magnet they come with, fit a proper one from a surface door contact. Looks neater too imho

If you don't know the code, call in the Pro's