lymebayalarms

Rapier for me, no other reason than I like the look of them...

Default through engineer menu and start fresh.

Check all inputs incase the device you are learning has already been learnt to another input. Do you gave the Ricochet monitor software installed and connected?

Are you 100% sure you have not already learnt a device to that spot? I have been caught like this before. Worth trying to delete the input you are trying to learn and try again.

You need to fill the panel full of water first, once frozen ensure cold start procedure is followed ;-)

Agreed..

Would say the Texecom kit would be slightly more expensive, although in my opinion the Texecom APP is lacking. As you rightly point out, it's all about the law of adverages... as James points out this industry is does suffer from cost being the overriding factor where the home owners phone is worth more than they are prepaired to spend on an alarm system to protect all of their worldly possessions.

Watch out....your PIN number and account details will be next ;-) no, valid point about to be made here....

90% sure you can program the fobs for 3 sets, (full,part 1, part 2) would need to check the book though.

Or if you are going to use the app and remotes, just locate the panel elsewhere. OR you can hardware a keypad into the panel....if you can find a sensible route for the cable, ideal. The wireless arming station is a bit pants to look at IMO

...guess he would have captured it all on his cameras.... ;-)

....apart from spending your hard earned cash on a Powermax....you can't go wrong!

Pyronix for me, just remember that the Pyronix APP is chargeable PA.

Second the Pyronix Quad. Pryronix Euro 46 is now APP compatible.

Galaxy wont trigger intruder outputs on bell test.

what setting were you using to read the 2k2 resistor?

Although there is nothing wrong with your meter

http://www.actmeters.co.uk/multimeters-accessories/act-6000-alarm-engineers-autoranging-multimeter

And how much did you pay for the meter?

So with the meter set to 200 ohms you get 0 with the leads shorted together, what about without the lead touching, what does it display....

So turning it back to 200 ohms, touch the lead together what value do you get?

What multimeter do you use?

I am for licensing our game personally

Struggling to get my head round this...

Roland Rodent