Jump to content
Security Installer Community

al-yeti

Trade Full Member
 View Profile  See their activity

  • Posts

    9,444

  • Joined

  • Last visited

  • Days Won

    129

 Content Type 

Everything posted by al-yeti

  1. al-yeti
    Thought steel version has more space Swb?
  2. al-yeti
    Just join crimp , solder and extend cables etc You could bury them in wall and put a face plate on top after I would open the plaster up more towards ceiling and fit panel higher up if possible then joins can be inside panel Do you have a better picture?
  3. al-yeti
    Nah we just chuck the battery away hope the new one works aswell
  4. al-yeti
    Hkc load is good tho lol
  5. al-yeti
    Seriously it's good cable
  6. al-yeti
    The CCA SW sell cqr isnt bad tho good for house bashing
  7. al-yeti
    Dude Simple process for you Swap both keypads round If keypad one works in position 2 atleast you know for sure to an extent the cable power and coms is good Then it has to be addressing and programming or the keypad itself
  8. al-yeti
    Check cable then , resistance etc, power etc I thought displaying those details meant there's no coms coming in correctly
  9. al-yeti
    You probably haven't closed it or wired it back correctly
  10. al-yeti
    I think we need to clone you
  11. al-yeti
    I was just think secom with the flashing beacon underneath lol
  12. al-yeti
    No know jack about them , everyone here has used them plenty But fastening cables depends on where and how , I still see steel cables above voids , metal trunking in communial walk ways or plastic with d clips or other fixings
  13. al-yeti
    As the gorillas here mention , high cameras for overview but only see tops of heads You need some cameras lower to capture the face and better detail Don't worry about vandalism , if someone breaks it just buy a new one lol Houses rarely have there cameras broken by thieves I would say neighbours break them more often lol
  14. al-yeti
    Out of curiosity Swap the strobe- and bell- wires at the panel only , do same test you said you did and what is the difference? As swb said maybe tampers not closed or some panels require a resistor on the tamper circuit , I don't know this panel either Ps you sure it's not aG6 bellbox?
  15. al-yeti
    Cable fault ? Or panel fault , have you tried disconnecting both keypads put the new keypad on the panel on short cable to see if it works ?
  16. al-yeti
    Where you panel? eBay? amazon? Think they have returns policy if bits were missing , maybe it was used panel , although resistors are cheap and programming them out is easier
  17. al-yeti
    Nah I have messed up sleep pattern, plus one of kids was not well so night shift But generally poor sleeping habits , haven't done Oncall for anything for years never did that for intruder , only for optical transmission stuff was more of a paid tea break , leave Oncall for the chimps dude
  18. al-yeti
    What do you install prime?
  19. al-yeti
    Bunch of gorillas man
  20. al-yeti
    Can fob change protocols? Or is that just the Honeywell stuff....
  21. al-yeti
    You being serious ? The council pulled a fuse ? Infinite hunk of junk anyway even the enforcer is better than that I assume texe probably works well to Yale Visonic Infinite And so on all get FA and jamming and gorilla feed
  22. al-yeti
    Not had any trouble with hkc plenty of stuff being fitted in London , plenty transmissions dot com
  23. al-yeti
    Yep gorillas all you have left here , all alarm monkies have evolved
  24. al-yeti
    Sage is independent Won't you be stuck with RBS version
  25. al-yeti
    Yes true these alarm gorillas here are bit more older (in alarm terms )
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept