Guest Posted February 16, 2020 Author Share Posted February 16, 2020 56 minutes ago, Logan said: Ventcroft primia 2 yes it is compatible but i recommend you replace it as its 20+ years old but its up to you if it still works Heres a suitable Replacement You can download the home control app without needing to be a engineer Thanks Logan, yep was going to replace, just waiting for summer to change. Can you resend the link for a suitable replacement. Quote Link to comment Share on other sites More sharing options...
MrHappy Posted February 16, 2020 Share Posted February 16, 2020 2 hours ago, Logan said: Im not really a fan of new elmdene (since when they moved to Chinese production) The pic is a pre phone day Elmdene Prima Phone day was in 1995, I fail to see why anyone would want to retain a knacked old alarm box even "until the summer" Quote Mr Veritas God Link to comment Share on other sites More sharing options...
Guest Posted March 7, 2020 Author Share Posted March 7, 2020 I am looking to upgrade to Euro 46, reviewed all the instructions. However before i start tampering with the old setup. what is the best way to remove old panel without triggering the external siren. I do not have the engineers code and one of the external sirens is difficult to access at this moment Quote Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted March 7, 2020 Share Posted March 7, 2020 Unlikely to be possible if the bell is in full working order. Quote Link to comment Share on other sites More sharing options...
al-yeti Posted March 7, 2020 Share Posted March 7, 2020 1 hour ago, Guest said: I am looking to upgrade to Euro 46, reviewed all the instructions. However before i start tampering with the old setup. what is the best way to remove old panel without triggering the external siren. I do not have the engineers code and one of the external sirens is difficult to access at this moment Disconnect mains and leave dangling on the side with battery inside Or just take it off and let it bell for 20mins Quote Link to comment Share on other sites More sharing options...
PeterJames Posted March 7, 2020 Share Posted March 7, 2020 On 16/02/2020 at 17:47, Logan said: https://www.amazon.co.uk/External-Wired-Intruder-Burglar-System/dp/B0195A52C6/ref=mp_s_a_1_1?keywords=pyronix+deltabell&qid=1581870519&sprefix=pyronix+d&sr=8-1 Or you could get the same bell £10 cheaper here https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/sounders-c-36_45/external-sounders-c-36_45_140/pyronix-deltabell-plus-external-sounder-back-plate-blue-p-2867.html Quote Link to comment Share on other sites More sharing options...
Guest Posted March 8, 2020 Author Share Posted March 8, 2020 Can someone please clarify how to rewire the external sounder from the paragon to the Pyronix, i have attached the diagrams. I am assuming that Old Paragon [B+] & [B-] to Pyronix [B+] to [B-] respectively (easy ones) Old paragon [BA] to Pyronix [Bell] Old paragon [BT] to Pyronix [TR] Old paragon [STB+] to Pyronix [STB] Old paragon [-STB] to Pyronix [B-] Quote Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted March 8, 2020 Share Posted March 8, 2020 Sounds right to me Quote Link to comment Share on other sites More sharing options...
Guest Posted April 13, 2020 Author Share Posted April 13, 2020 Is there any other way yo wire up the external sounder, as when the alarm sets it blows the fuse and also sets the SAB tamper fault on the reader Quote Link to comment Share on other sites More sharing options...
james.wilson Posted April 13, 2020 Share Posted April 13, 2020 It must be wired incorrectly. You have an output that is going active on armed connected to something Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.