goncall

ADT bought modern 97 ish and a load of white hex with Adt modern were made(I’ve still got one somewhere)but not many were fitted, then thorn (tyco) bought Adt very soon after so the white hex got binned for a yellow hex with tam on it (thorn Adt modern) that never made it to press then it was decided to print the Adt logo on the yellow hex you could put an external siren in the original telecom panels but you needed to fit an external psu and use the trigger from the panel

They were made by advantor ,they did sent fire ,med and pa which complied after changes to the programming fire and med were a call to site there were 2 versions the 680 and 685 the later one was progd from its own rkp as it had a 2 segment display sounders were internal you needed a separate psu f you wanted an external siren used sia signalling ,I've got th manuals I'll try to upload

The pid connections are for connection to a pid(point interface device) bit like a galaxy rio ,used on very old ADT focus panels which were way ahead of their time back in the day

A chip buttie in a burger bun,you dirty *******,it has to be in a stottie

Did you not get an answer from your post 7 years ago...

I think the Peckham spring is a direct replacement

as long as it hasnt crashed engineer menu 44 will show the last set and activation entries id send it back to the maintainer or honeywell personally as any tom retrieving the data could be dragged into court as an expert witness

He doesn't need too,that's like asking him to snap wire a door

Agency? Forget it,if you haven't built up a rep in the industry and have plenty of contacts I'd stay where you are,subby rates are not that great so you will be up against plenty of lads who are quick and know the game

3 calls a week isnt bad,easy £500 on call allowance for the week

An old sonic probably connected to a map 6

He should have called his alarm co out to fix it,they would have been there and fixed it by now,but 5 hours later he still has no working system

Many but the customer calls us out to fix it,

From your oringnal post your 15 a month no ones talking to you either

It's been a while but don't you activate test mode on the tester then flick the switch press again then apply the low tone thud by banging the window which then activates the high tone,I like bgds in the right settings

I meant test it with power restored if it alarms all is fine,the term all was fine before hand often means it was never tested to prove it actually does work

It opens in alarm,no power no alarm

There always electrical engineers

Have you looked inside the panel it may be there..

It will be a pyronix sa reader

Use a menvier m12

Probably true Abel made their own sounders as they own or did own a metal fabrication company,the glow in the dark offering is a work of art

Also try switching the extender switch to data and diss the yellow blue,while I've Seen those extenders I've never come across one used for Alarm signalling so not sure if it would hold a line fail off

Have you tried it with the extender unplugged,another thing the yellow blue is the virgin line and not a bt line?