al-yeti

I still don't get it The white wire goes to a tamper terminal Then the other terminal should be like led to zero volts unless your using more than one bell

Probably outputs I don't get it why is white going to the other tamper terminal? And where does it go in the panel

Your picture doesn't show where white is connected in bell box end

If there is movement or mechanical problem with the box , with everything normal you should be able to create the tamper if you move the plastics Although it's possible for a bell to be faulty from new I still think might be mounting issue , Have you mounted it to flat brick or something else Is the cable entry from top , maybe it's crushed going into the box Does box lid sit correctly? If not it sometimes looks slightly lifted because base is warped on what it's sitting against so switch is not firmly down Pictures man need more pictures where you live off the A40 somewhere?

Yes ub3

So basically they want a system fitted to grade 3 specification with no bell box externally , which is simple you just install it as grade 3 But as they said above not much good for insurance approval as it won't conform totally to g3 All about insurance at end of the day and if it isn't they just want something more hardcore

Lol

Doesn't let me look at those files? I meant connect the Tamper so it goes to zero volts or stick the resistor in bell across directly so it's bypassing the bell tampers , not sure if I wording it right ,leave the other wires connected so bell operates and then see if any faults occur Do you have a meter? You could also check the resistance of the cable while disconnected and looped

Pictures Cover on Cover off Side view Bypass tamper at bellbox , and report back how many faults appear One fault or two faults or more So short out the tamper at bellbox end

Blue tamper , can't see what white is doing though Have you got a picture on the 48 side I have feeling your connected to wrong connections

No outputs default? I suppose op probably changed them anyway So this is a deltabell?

Cable fault? Or water has got to it ? Haven't we done all this already with you?

Moped Muppets One time copper was chasing one he drove past me and hid in a school, i directed the fuzz the police in the right direction Knock em off I say

If you say so.

Should work , as these lot know I look after ONE 520 lol , just wondering did you try restarting the panel ? After making changes What other message does it return on rss

Strange , scrap it be serious get new upto date system fitted

All of them can be switched to unmanaged if you know how to use them

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F123380932600 These work good for me , as good as 8ways you gave me , but obviously have the gigabit uplinks

Yes

If we don't leave EU that UK map won't exist

Cos the dodgy bellbox in your house you posted , the one that isn't straight , Chris is close to you he could sort it out for you man You need to get serious if you want be in the business long........

So you need to buy a Rio to expand the wired zones Galaxyguy if your reading? Is flex20 same as g series you can use any zone as wired and wireless If that's correct buy a Rio , expand fully and then do what you have to do

Why would you do that on a flex 20 List all your circuits?

Why don't you just have proper cameras and multiple screens There's an installer page here somewhere but mostly for alarms I know guy up north he will do you discount four cams max £3500 What you think? No remaniac remarks please

They still warp , but the deltabell is ok as long as screw is adjusted , especially on pebble dash of old , some newer pebble dash is worse , or that other rough stuff painted over mostly bumps all over the gaf