al-yeti
-
Posts
9,566 -
Joined
-
Last visited
-
Days Won
136
Content Type
Profiles
Forums
Events
Downloads
Gallery
Blogs
Everything posted by al-yeti
-
Weird intermittent failure of DSC zone expanders
al-yeti replied to TinkerBear's topic in !!..DIY Installers..!!
What cable you using, how far apart is everything? -
As above don't bother
-
You want to use o/c Alarms as you said Tampers in series at the panel and between detectors where required
-
As above scrap, Get new panel and keypad and bellbox, use existing wiring , maybe you get away with using the existing detectors
-
Apart from that I don't remember 9448 using resistors anyway but might be me, thought it was a global tamper , old scrap panel needs to go anyway So where are your pictures?
-
Your only using one pair for alarm and tamper if your using eol There must be another reason the resistors are in the panel and not in the detectors , maybe short cut when last panel change took place
-
As you set your panel non eol and pirs are eol , so you would change it This is the posh answer
-
Seeking Advice on Upgrading Home Security System
al-yeti replied to kieranas's topic in Members Lounge (Public)
As above But what cameras and alarm you currently have -
Silence loud beeping when arming alarm at night.
al-yeti replied to Ketan's topic in Members Lounge (Public)
No need to think, read manual , get engineer to make changes for silent set -
Silence loud beeping when arming alarm at night.
al-yeti replied to Ketan's topic in Members Lounge (Public)
No he can't do that on this -
You did the call out?
-
If you were a thief probably true , get distracted by what in the freezer to eat But then you probably want the enforcer to
-
Most thieves grab and run Ana alarm internal sounder is probably more important than external in my view The noise will hurry them up somewhat and usually don't stick around for long , so damage limitation
-
No because even if you silence the panel There's no garuntee you won't trigger the bell with a low battery and not being able to stop the external bell siren If you had a handy man who knows basic electric he could probably butcher it off cheaper but probably you won't be able to use it again
-
App prices vary but near enough Depending on where your external siren is you need to know how to open that aswell Open all detectors Open main panel and disconnect battery You need to be careful of mains electric
-
Good price Short term take all batteries out and turn of the alarm completely yourself Or ask them for a price for decommissioning probably the same tho
-
Silence loud beeping when arming alarm at night.
al-yeti replied to Ketan's topic in Members Lounge (Public)
So what area are you in and we could perhaps find an engineer for you -
Silence loud beeping when arming alarm at night.
al-yeti replied to Ketan's topic in Members Lounge (Public)
If you know engineer code then you can do this and check menus But if you don't have it ask you installer to do it for you, the benefits of the installer and paying him will put weigh the cost and headache And if installer has disappeared there's plenty more who can work on this panel -
Silence loud beeping when arming alarm at night.
al-yeti replied to Ketan's topic in Members Lounge (Public)
In the engineer settings there should be option for silent set -
Front door sensor will have a small switch spring to show the contact has closed , probably you didn't close it properly or perhaps broke or dropped the spring or something along those lines
-
Do you mean when you press the keypad it takes time to acknowledge the keypress ?
-
Yo welcome JW will have to remove his surname now
-
Well we have hit a new all time low (verisure problems)
al-yeti replied to Imnotshankled's topic in Members Lounge (Public)
Send enough messages in order to enable private messaging Although if that's not the setting here , not sure who wants to take over verisure -
Yes on the end of it is the arrow
-
Look at the cylinder there is an arrow pointer , needs to be pointing up, unless you magnets are to far away
