MrHappy

Hugh, I'm going with 1 x Plaggy enforcer controls & NOTHING as wired devices on the system ? Supervision fault, what's the signal strength of each radio device on the system ? Are all batteries 2yrs old or less, when they are replace spin them around in the holder to ensure there are go contacts If the house is not 'kin massive & the controls are no in silly place eg in cupboard surrounded by display cases of lead painted figures or something Swap the device far away for an identical item which works fine in a different location, ideally the item which drops of in location A should drop on in location B, proving the device is duff... chances are all the hardware is fine & its an issue with the environment of the installation ?

250 minutes ?

its probably all radio tat ??

I'd assume the spark may have tested a new spur with your controls attached I have spare psu's, I did have issues some years ago, they go funny before failing... The logs show 1 mains fail & loads of tampers & supervision faults ? Is the sub seeing unreset faults when they put their code in for another tamper or supervision fault?

replace the switch mode psu

lucky you, I can recall a house building using these cira 1995 !

needs a licence form risco

It's on an old CD with the regal safe stuff....

personally I'd smash the panel to bits with a hammer then set it on fire to ensure its dead RS125EngineerManual.pdf

It's pre internet & pre pdf ! I once had paper manuals & cooper menvier cd with had regal safe stuff on it. I think the TSI manual site is broken, so if not I. topic it's a hard find

The fcuker bent 'em straight

yes, I think he was on borrowed steps form the shop keeper, fitting a camera

On the high street on Monday Verisure man on a pair of steps outside alwhat appears to be a 24hr fruit & veg shop. Daft cunt fails off a steps just missing a member of the public & he lands in a box of bananas. I

edited, (good enough ??)

that ↑ + the tamper in linked out in the panel.

I'd assume the Eaton tags to be more robust case wise than random ebay ones...

maybe, anything listed as galaxy, gardtec ect... will probally work, unless your buying 100's it a bit pointless

I'd assume app rather then monitor ? I'd probably use a Orisec CP20 + The Keypad with the big display, wireless access point on the panel, orsiec radio devices & pyronix deltabell Or a Texecom 64-w + blue lcdp + radio devices, smartcom + deltabell Or a euro 76, radio zem, wireless wifi card, euro keypad, euro radio devices & a deltabell Orisec is probably cheapest equipment cost & euro the dearest,

Iirc all done via pc, licence was an afternoon employee thing ?

I had a bloke not bat an eye lid at replacing a number of 2yr old WiFi access points Asking to replace a 20yr alarms is like I've shat on the floor

Options - CPX from Ebay 595 / 600 + Keypad from ebay or replace everything...

I love Hik-Vision almost as much as Wetherspoons

Is the job near a Wetherspoon ?

I assume a flight simulator will have 19" rack controls ? https://www.kepcopower.com/

https://simatic-market.ru/catalog-resources/pdf/RUS_543309.pdf