Jump to content
Security Installer Community

All Content

Showing all content posted in for the last 365 days.

This stream auto-updates

  1. Past hour
  2. PeterJames
    Then maybe he should be paying for an arc to call him and his keyholders. You can then use a WiFi or GSM digi to call the arc and the arc will call people until someone answers
  3. Today
  4. Dave Walton
    Indeed, personally I can't get my head around people not using part set, why wouldn't you, once set up right it's great, press 2 keys, and go to bed........ In part set I have the whole of the downstairs and the two upstairs rear bedroom windows armed, (Single storey flat roof at rear so those windows are vulnerable) the landing off and the stairs timed, allows everybody to go to the loo during the night........
  5. Dave Walton
    Hi all. I have a question for anyone familiar with the above mentioned panel. In programming I'm setting up the chime on the entry / exit front door, unlike my previous panel, chime only sounds when door is opened, is there an option somewhere that will allow me to enable the chime to sound on both the opening and closing of the entry / exit door, the only options I can find for the chime are chime 1 (Single Tone) chime 2 (Double Tone) and on or off. Regards, Dave.
  6. Yesterday
  7. al-yeti
    As swb then but then he probably has no monthly contract either?
  8. sixwheeledbeast
    Then I would suggest monitoring in that case.
  9. jmeader43
    Customer insists on having phone calls to a list of numbers rather than the DIGI-WIFI as he says he doesn’t keep his mobile with him to get the app notifications. We’re talking an old stuck in his ways elderly man you know the type “Why does it have to be changed it’s all BT’s fault they should just leave the landline on PSTN blah blah blah”
  10. al-yeti
    Your mad , that cost as much as v11 enforcer ? Which can handle an app, just saying as you says calls , which are pointless and slower
  11. jmeader43
    An update to this topic for anyone reading it Scantronic SD-LTE Universal 4G Speech Dialler This is what I have proposed to the customer if they want calls to mobiles and landlines when there is an alarm activation
  12. Last week
  13. ultrasonic
    Internal of the 41A
    Yes I remember installing the Mod 88 great dialers, and working on the Mod 80, with the long loop tape and a carry handle on the top! Hi, yes had the plastic part, had used iit on the 43a, with the exit timer, unsure what shorrok called these controls, did they know them as 41a,43a, 44 etc
  14. Dave Walton
    Thank you. (I don't have the wiring instructions, this kit came to me as previously used)
  15. sixwheeledbeast
    Like most sounders the Twin alert manual has the wiring instructions for different manufacturers. Aux Tamp / Aux Tamp / Bell / Spk- / 0V / +12V
  16. Dave Walton
    Good evening all. Requesting a little help from the good folk of the security installer. I have a pair of Pyronix internal twin alert speaker / sounder units that I'd like to wire into the above mentioned Texecom Premier 24 control panel. I've attached a couple of pictures showing both the speaker / sounder connections and the control panel connections. If some kind person would kindly give me the correct wiring connections between the two it'd be much appreciated. Thank you and regards, Dave.
  17. Earlier
  18. PeterJames
    hi
  19. james.wilson
    Check the relay is firing with a meter
  20. al-yeti
    So what panel is it, as you said old
  21. al-yeti
    Yo
  22. al-yeti

    Ryan Godfrey

    al-yeti replied to RGodderz's topic in Guest Forum

    Guessing myself Right led flashes? What's left led doing ? Red or green Is it in secure or insecure mode , as I thought one mode requires both fob and code in some sequence
  23. PeterJames
    I think Imran thought you were the customer not the installer and has confused the issue
  24. PeterJames
    That would be my guess. but as factory standard the timer is usually too long. Have you put the com and n/c in series with the lock and power? I know its a daft question but I have no idea of your ability
  25. sixwheeledbeast
    Not used one. Is the strike time really short? Does the strike lock require the same voltage as the KP? Have you tested your findings with a multimeter? Is it just not wired correctly or some other simple mistake?
  26. RGodderz
    I have a stand alone KP500 only attached to an electric strike lock the com NC the key pad is giving the lock power, locking it i have programmed it, with fobs and a code when i swipe the fob or enter the code , the keypad flashes green and accepts it however the power does not drop for the lock the lock will of course open it I take the power off manually taking a cable out
  27. jmeader43
    Speech dialler on PSTN is obsolete I’m talking about an LTE enabled dialler that can phone the customer over 4G like the old way before the broadband went digital
  28. MrHappy
    Obsolete item, I probably got some.... Somewhere
  29. Dieter

    Fused Spurs

    Dieter replied to Kate Scorey's topic in Electrics

    Which is also what i was told on the tavcom mains compliance training. _______________________________________
  30. Dieter
    Looking forward to contributing and learning.
  1. Load more activity

  • Who's Online   2 Members, 0 Anonymous, 61 Guests (See full list)

  • Member Statistics

    52,043
    Total Members
    1,664
    Most Online
    DeedPopo
    Newest Member
    DeedPopo
    Joined

  • Forum Statistics

    33.4k
    Total Topics
    446.5k
    Total Posts
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept