7 hours ago, Logan said:

Is the keypad on the panel or is it a remote keypad version 

It has the keypad on the panel and there is a remote key pad

8 hours ago, sixwheeledbeast said:

If you go Texecom then use a Premier 24 Poly not an Excel

Thanks, i will look into this one. 

5 minutes ago, Logan said:

Do you use the remote keypad the most or the panel keypad the most

We will be using the keypad the most as the panel is hidden

9 minutes ago, Logan said:

The excel is probably a better panel for a DIYer as it doesn't use EOL. 

 

you can wire a excel, euro or premier eol if desired...

1 hour ago, Logan said:

For some reason my premere only seems to accept EOL

Reality you don't know jack , let alone alarms 

 

 

 

1 hour ago, Logan said:

i worked on tons of panels even ones from the 1980s

Most of them faulty

13 hours ago, Logan said:

For some reason my premere only seems to accept EOL

It's all in the programming....

Does any one know if there should be any issues with using the paragon wiring and external siren with the Pyronix Euro 46 (Note i do not want to use EOL for ease of fitting) . And when you purchase the Pyronix does it come with full instructions as there are limited downloads on the internet 

1 minute ago, Guest said:

Does any one know if there should be any issues with using the paragon wiring and external siren with the Pyronix Euro 46 (Note i do not want to use EOL for ease of fitting) . And when you purchase the Pyronix does it come with full instructions as there are limited downloads on the internet 

I want to use the same PIR's as well. 

 

10 minutes ago, Logan said:

Yes the 46 includes the install, programming and user guide 

 

Your bell box should be compatable  (you can attach a picture if you want so i can verify that it is compatable)

 

I believe the recall was for communication to ARC (alarm receiving centre)

 

Thanks for the info, I will get a picture tomorrow. 

 

I assume the recall was just a firmware update in the end?

 

Do you believe the PIR's should be OK? 

 

 

You can still use eol just if your replacing then the sensors could probably do with it too

On 11/02/2020 at 19:43, Logan said:

Yes the 46 includes the install, programming and user guide 

 

Your bell box should be compatable  (you can attach a picture if you want so i can verify that it is compatable)

 

I believe the recall was for communication to ARC (alarm receiving centre)

 

Hi Logan 

 

I have attached the bell box picture, I want to use this to start, with the aim of replacing it later in the year. 

 

1 other question, do you need to be an installer to use the home control app on Pyronix? 

try Elmdene