Jump to content
Security Installer Community

Another Which Wireless Alarm Thread


thorfun

Recommended Posts

'New builds', if the builders are worth there salt, they should be allowing for alarms, if they are not then the architect is imho at fault-not rocket science is it, allow for sky, BT, data network etc etc for your multi engineered home-ahhhhh- what about an alarm to protect all this high tech stuff.........ooops...to late.

You make a valid point here. But the developer in this case (well, the sales assistant speaking on behalf of the company that is!) told us that they used to cable for wired alarms but most people didn't utilise the wiring.

So, it's obvious that they can cut costs and get a bigger profit margin if they don't bother with the wiring. It's annoying for those of us who would've used the wiring but I understand the economics.

Hence....I'm stuck with the wireless route and less than ideal cable routing!

But don't forget to always look on the bright side of life! ;)

Link to comment
Share on other sites

Not an installer, just someone who plays with alarms.

 

I don't see the point in going for a 1-way system anymore. Scantronic Ion is pretty poor, vulnerable to jamming (intentional or not) and replay attacks (read this PDF on the Abus Secvest http://sitsec.net/files/secvest_analysis.pdf, Cooper have verified the same protocol is used with Ion). I wrote about the differences between one and two way systems from a technical perspective a while ago: http://cybergibbons.com/alarms-2/alarm-technologies/it-swings-both-ways-especially-for-rf-comms/

 

The Pyronix Enforcer is pretty good I think, but I think I prefer the Texecom Richochet gear. I like that you can use Wintex (PC interface software) easily with Texecom. The design of the system, electronically, is much more compact and looks like it was done from the ground up, whereas the Pyronix gear looks a bit hodge-podge.

I have a blog, some of which is about alarm security and reverse engineering:
http://cybergibbons.com/

 

 

 

Link to comment
Share on other sites

Not an installer, just someone who plays with alarms.

I don't see the point in going for a 1-way system anymore. Scantronic Ion is pretty poor, vulnerable to jamming (intentional or not) and replay attacks (read this PDF on the Abus Secvest http://sitsec.net/files/secvest_analysis.pdf, Cooper have verified the same protocol is used with Ion). I wrote about the differences between one and two way systems from a technical perspective a while ago: http://cybergibbons.com/alarms-2/alarm-technologies/it-swings-both-ways-especially-for-rf-comms/

The Pyronix Enforcer is pretty good I think, but I think I prefer the Texecom Richochet gear. I like that you can use Wintex (PC interface software) easily with Texecom. The design of the system, electronically, is much more compact and looks like it was done from the ground up, whereas the Pyronix gear looks a bit hodge-podge.

I've already read your blogs which is why I want a 2-way system! I found them very informative. So thank you! cheers

Link to comment
Share on other sites

id be interested in that cg. if you ever want kit to test/find out if its any good/help me use good stuff etc let me know ill send you what sia use foc to test and publish

I was thinking of testing 50 HKC's.

I really can't be ar**** with it anymore.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.