james.wilson

and its on the piss OP as it says 9A/h on it I assume its a nasty battery? Does it rattle when you shake it?

could you do a post on what you think of the miniair. ?

so don't then would be my take

enersys own yuasa iirc

id provide a relay for set status then let the shutter people wire it in

You can find all sorts of stuff that works perfect world, but when its actually needed who knows? you can find info like that here a lot of it doesnt

as a side note I assumed you were passing yourself off as a professional installer. I obviously got that wrong

Jk Do you fully accept liability for what you have done, or did you assume you have no liability cos you did your customer a favour. Id agree that members (including myself) can say things some don't like to hear. When you have an insurance company (not your client) sueing you for poor advice and or professional incompetence you might rethink. But your happy with some of the comments made, unhappy with most it would appear. But it is those ones that will in hindsight be remembered. just to be clear your clients insurance co will want to blame you for 'failure to perform', it wont be your client

Its great imo. Used to swyx which had a better softphone imo but as a pbx I rate 3cx for flexability

not yet I'm pre op

We have just upgraded our handsets on our 3cx system. Cracking phone

as 6wb you have a programme issue

Plenty of comments some will be helpful You should look at getting trade status too Id assume that Mr H is saying its a common mistake to think this industry is a gold mine, but he is a bitter old man

hello there

an spc vs

if he is gonna get a refund your right I do like how the van stock is now locked the gal stuff was open

your right they are

I know better. ill send you a panel foc to give your free opinion of what is better? Texecom yes is the diy volume

I don't use it but I'm not a diy user

so its stable now out of the box a diy would get?

true

scanny wireless is awful

the adt/tyco system is different. They lock it to their version, as they should cos all are sold at a loss. Unfortunately this ends up on ebay (non paying customers or van stock or... etc) If you have an adt panel you need at least adt peripherals. If you have a non adt panel the nicked stuff wont work with it

if going for the premier you will need the flash upgrade kit