Jump to content
Security Installer Community

james.wilson

Admin
 View Profile  See their activity

  • Posts

    30,643

  • Joined

  • Last visited

  • Days Won

    287

 Content Type 

Everything posted by james.wilson

  1. james.wilson
    fair play for a managed switch, all mine at work are unmanaged.
  2. james.wilson
    https://www.securitywarehouse.co.uk/catalog/intruder-alarm-c-36/movement-detectors-c-36_116/all-c-36_116_37/pyronix-fpkx15dt3-15m-dual-technology-digital-detector-p-2114.html
  3. james.wilson
    iirc Pyronix had issues with the lens degrading. You used to be able to get replacement lens
  4. james.wilson
    are your eyes really that bad?
  5. james.wilson
    So hp for you both
  6. james.wilson
    -38 is proper cold, I reakon that is specialist area. What do you use other than kit designed for minus 20?
  7. james.wilson
    I doubt both
  8. james.wilson
    id assume its the expander then?
  9. james.wilson
    What devices do we all use?
  10. james.wilson
    welcome
  11. james.wilson
    is the signalling using udp or tcp?
  12. james.wilson
    agreed
  13. james.wilson
    I accept that but I thought the question was about a service not a takeover. I reakon an hour to do a takeover is speedy depending on the panel
  14. james.wilson
    So its a takeover or a service?
  15. james.wilson
    I wouldn't do the resistance checks on the cable assuming eol. If DP then its seconds. Id agree it shouldn't take an hour 30 mins for 8 or so circuits. Do you do the paperwork check and the walktest on the same walk around or separate walks?
  16. james.wilson
    from memory too I think your right But its a way past it bit of kit good in its day
  17. james.wilson
    Ah yes a terminal, cutters and a meter then. When you have to plug into stuff?
  18. james.wilson
    Ive just got a surface book to replace my surface pro. I rated the pro as I used it for site visits, plans etc what do you prefer as an onsite device?
  19. james.wilson
    yeah but unless low risk you wouldn't use a maglock
  20. james.wilson
    if you mean compliant then no imo it isn't
  21. james.wilson
    nothing either way I wouldn't try them. Consumer devices are that. Id rather use a pro internal device outside
  22. james.wilson
    supposed to be 3 yrs but id replace at 2
  23. james.wilson
    if internal doors then id say non issue
  24. james.wilson
    agreed active beams are best outside or takex sensors but I wanted to test them in a very harsh environment
  25. james.wilson
    yeah due to sunlight straight into one of them
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept