Lwillis

Programming in the new sensor is an engineer only function. Any local company will be able to takeover the system and do this for you. Contact a couple of companies for quotes for a callout

Sounds like you've enabled something that you shouldn't have.

Are you using any comms on the system? Sounds like you've got Arc/SMS enabled. Disable that and try again

Better of with the LAN module IMO. pstn module isn't compatible with the app panels and the wifi module isn't either due to the metal panel- they were on about releasing a wifi aerial but not sure if it's out yet.

Not worth taking it over if it's one or two systems with those in and even then you'll need to flash it. better off swapping it out. The speaker outputs on them go sometimes -goes into full alarm even when unset without warning.

Yea take over a few over the years.

Speaking from past experience you would be better of changing the unit out -Upgrade it to UDL while your at it too. Its usually a ball ache getting them transferred.

No I mean it sat in the box for a few a month. It was up and running in an hour when I eventually got round to it

Tookme a while to sort it out lol was putting it off for weeks.

HKC apps is the best one IMO. nofitications are spot on and very fast. ripped out a galaxy to fit HKC at home.

Fitted a few HIK rebrands over the years there is atleast one out there with the same firmware tho.

All master blasters must be fitted directly above the keypad for use on bell tests

Used to service a gent Vigi system in a domestic in the sticks. However it was a stately home with outbuildings etc. Owner built it from scratch and had a full set of drawings for fire intruder and the CCTV.

As above most companies can take them over if it's not a LeSecure. Where abouts are you maybe there's a member here in your area who can help.

Buying from alarm supplies , had Paul up to see us and had a 1070 kit to try. Which im warming too.... Not sure if cutting the pillars would be enough , the dc6 units are even better than the current ones.....

Good to hear The 1070 is tight got cables and signalling (couldn't fit a Dualcom inside one the other week) Might be easier on a new install with plenty of length on the cables but these were panel changes (f'ing nightmare) Does the quantum take the WIFI cards?

What do you think of them?

Old thread but yeah wifi module is good -range a bit limited tho and the wireless keypads are ****. Fitted 2 HKC 1070 recently - reminds me of the aritech CD gear but great panels non the less

Surely if your working in a fire alarm maint dept you should have the knowledge and experience to not be asking this question. which Honeywell panel is it?

I've got some hightop scruffs, really comfy aswell

Contact another local installer check the SSAIB or NSI website for a list of registered ones.

No don't have to use the bracket. We never normally do unless they are feeling mounted

Just had one system go pop with the recent lightning up here.thank god

I've fitted a few HIK systems and haven't had any callbacks with faults. For now I wouldn't bother with IP and would go HD-CVI, still 1080p images and the price is usually cheaper than IP.

That panel is obsolete now as has been for a while. I'd reccomend contacting a local approved company and getting it serviced. It will most likely require a new standby battery.