Jump to content
Security Installer Community

al-yeti

Trade Full Member
  • Posts

    9,135
  • Joined

  • Last visited

  • Days Won

    116

Everything posted by al-yeti

  1. What's the Pgm doing when in engineers mode? And what happens when you manually do the eng hold at the bell
  2. Yes there's a few of these about Vista keypad ademco panel
  3. Yeah but everyone thinks your great eh?
  4. I think the mods are great especially Peter James I think he is such a wonderful person always helpful and understanding, I think he deserves a pay rise James
  5. Yeah they are just installers not engineers haha Hi
  6. Yeah but you ever get the angle wrong? Kept going?
  7. Keypad..... Always unsets clear? Checked detail log? When they go missing maybe common link somewhere
  8. Don't know geezer but problem hasn't surfaced since fixing the cable (New cable) I didn't diss the neg? I put it back on
  9. Well if you remember I had this issue with a 520 , a line dropping some modules , and only thing I found was the neg problem since then been a while the problem hasn't surfaced
  10. Honeywell documents the ground going through, so that's all coblers?
  11. How have you powered from panel to power Rios ie what does ground do and what does the positive do
  12. Nah man £100 if it don't work due to these errors, they won't call you again , or they will give you the job because kit is new and sealed , or you will turn up and its second hand kit or part new and part old What we need is quals!
  13. SIM how much you charge if equipment doesn't work and have to leave it, what you charge then?
  14. Laptop or handheld device carried by all these days Software which can be run on a smartphone would be handy
  15. What?????That's anti mask????? You mean red flashing fast could be the sensor is showing masking , which isn't what you described Fast flash is trouble problem with masking or fault with the Pir and so on Did you just buy this ? You may have damaged it or its faulty
  16. that's why I asked, to work out if you were going to connect a speaker to correct terminals or the sound bomb You can do allot of damage
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.