Jump to content
Security Installer Community

al-yeti

Trade Full Member
 View Profile  See their activity

  • Posts

    9,121

  • Joined

  • Last visited

  • Days Won

    116

 Content Type 

Everything posted by al-yeti

  1. al-yeti
    Yes that's the one a galant
  2. al-yeti
    Yes there's a few of these about Vista keypad ademco panel
  3. al-yeti
    !
  4. al-yeti
    Yeah but everyone thinks your great eh?
  5. al-yeti
    12core?
  6. al-yeti
    Lol, not that it worries me!
  7. al-yeti
    I think the mods are great especially Peter James I think he is such a wonderful person always helpful and understanding, I think he deserves a pay rise James
  8. al-yeti
    Yeah they are just installers not engineers haha Hi
  9. al-yeti
    Yeah but you ever get the angle wrong? Kept going?
  10. al-yeti
    Keypad..... Always unsets clear? Checked detail log? When they go missing maybe common link somewhere
  11. al-yeti
    Don't know geezer but problem hasn't surfaced since fixing the cable (New cable) I didn't diss the neg? I put it back on
  12. al-yeti
    Well if you remember I had this issue with a 520 , a line dropping some modules , and only thing I found was the neg problem since then been a while the problem hasn't surfaced
  13. al-yeti
    Is it an adt firmware
  14. al-yeti
    Honeywell documents the ground going through, so that's all coblers?
  15. al-yeti
    How have you powered from panel to power Rios ie what does ground do and what does the positive do
  16. al-yeti
    Nah man £100 if it don't work due to these errors, they won't call you again , or they will give you the job because kit is new and sealed , or you will turn up and its second hand kit or part new and part old What we need is quals!
  17. al-yeti
    SIM how much you charge if equipment doesn't work and have to leave it, what you charge then?
  18. al-yeti
    Laptop or handheld device carried by all these days Software which can be run on a smartphone would be handy
  19. al-yeti
    What drill?
  20. al-yeti
    What?????That's anti mask????? You mean red flashing fast could be the sensor is showing masking , which isn't what you described Fast flash is trouble problem with masking or fault with the Pir and so on Did you just buy this ? You may have damaged it or its faulty
  21. al-yeti
    that's why I asked, to work out if you were going to connect a speaker to correct terminals or the sound bomb You can do allot of damage
  22. al-yeti
    Sounds like you need to look at hkc , 70zones wired data, wireless on board , 10zones available standard
  23. al-yeti
    Have some Polyfila a ready for the room inside if you get it wrong Overhang doesn't matter, above suggested your drilling in the wall one course down 45angle , depends on how your house is made up , some have the inner wall in the way and you have to feel quite far down where the cable is , just shove loads of cable in from outside and if you don't have rods use a metal coat hanger as a hook to poke in from inside the roof to the eaves to find cable
  24. al-yeti
    What panel
  25. al-yeti
    You post screen shots here
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept