These

 

These used later had an LED... (just visible @ the bottom of the button)

 

42 minutes ago, datadiffusion said:

 

Elmdene did one too, I've got one here without the 'key', no idea why I keep it on stock.

I had an 'exit terminate' parts bin sort out today amongst other things (30kg of stuff to Logan  )

 

5 x Elmdene ET's with the 12V red led

1 x Elmdene magnetic ET

One small type Arnie

One large arnie

One Knights surface keyswitch (not really ET but sort of feels like the right bin)

5 x chinktat but look nice ET buttons on flush stainless plates (this was leftovers for a posh Bath flats job, all monitored by the 24/7 concierge, AFIAK since we never went back the concierge is long gone...)

 

I think I've a dantech exit terminate button on stock....

https://www.dantech.uk.com/DA123.html

 

That's one hell of a list of variants!

I have always rated Dantech stuff TBH.

 

 

Used their relays a few times, and those tampered alarm wire to armoured boxes they sell, you could make your own but buying theirs is much easier!

 

https://www.dantech.uk.com/DA318.html

 

Though, I like the way they obviously have about 20 years stock of old-shape MK metalclad boxes to get through before they move on to the modern ones!

Edited July 16, 20196 yr by datadiffusion

Handy for when you need to use conduit. I always prefer to lose the wiring in the cavity where feasible, less chance of some muppet smashing your work up with a FLT.

Most use Dantech for CCTV PSU's

7 hours ago, datadiffusion said:

So in my bundle of **** that some poor guy was no doubt delighted to offload AND get paid for it, there was this DA product, which I never knew existed...

 

 

What's special about it is that its got it's own miniature speaker so you can hear the tones from outside - I've never seen that before.

 

And that's about it really.

 

Another one that didn't get out much 

 

Looks like you could connect up the special order tamper or NC contact yourself if you wanted to

Edited July 18, 20196 yr by datadiffusion

Those DA buttons were good, Id forgotten all about them till now, brings memories flooding back running a 12 core to a speaker to pick up the keypad door contact and ET switch 6 for the RKP 2 for the ET 4 for the MC, the speaker sound and the ET soud wer all wired from two of the terminals of the RKP. It was okay doing this for commercials but a bugger to hide the cables for resi

34 minutes ago, PeterJames said:

brings memories flooding back