james.wilson

im assuming this is about the difference between dual edge and quad edge elements. Can't see its logic vs pulse count. You could go leftfield and add alarmcom fuzzy logic ir220 into it

a. Ideally 13.69 but that is now 13.75 as most diag cant hit that resolution b. Ohms law depends on the resistance and the distance. Resistivity is what matters. If the course is up to date id assume you discussed copper vs cca

It's way better to simplify. You do know someone is gonna ask you to put all your questions together lol

id break em down. One post one question. I read the first then got bored mid way through the second. I don't know what the third was. Break it down and more will reply

only etsi panels I know are the spc and the hkc

flush contacts I like these https://www.securitywarehouse.co.uk/catalog/elmdene-en3qfc-grade-3-flush-contact-green-resistors-p-1620.html

could you post pictures of the doors?

Still at allcooper then

As dd

As above in old term its an SAB, sas or scb

Off topic I thought U was working for a glos based firm?

Set up semaphore or smoke never use tap its awful

Hello

just use an optima and a couple of door contacts

before you throw away your meter is the battery ok in the meter itself. When they get low it causes them to over read

maybe put a new battery in the meter?

I played with this a few years ago and when i get round to it will use it properly http://getvera.com/

Its quite a leap but well worth it.

always a great response to get more replies. You must know forums by the sounds i personally disagree with the design

but as a side note are they really teaching using vibration sensors on serious systems?

so you have your training course and you want the Tsi brains to answer it?

so totally useless. a ce thing

I'm assuming it showing something?

you have that many too?

the wide tolerance option was added to keep with honeywell the regs are very tight, too tight imo to the point of it not working without a bit of grey.