9651

Fair play Also going back to the op I think £25 is a fair price for port forwarding. It's all very well saying it takes minutes, but that's bollox tbh. Trouble with domestic his there's far too many makes & models out there. Take the other day, I had two by home hub 3's. First one done was done in minutes, no problems. Second one would not open for love nor money, must have spent an hour ******* about with it. Turns out its a type A that needs to have the item in the dchp table even if it' has a static address. The whole thing was just a pita compared to the type b that forwarded first time.

Change the output of the panel to detector reset. Then connect the 0v of your viper to it. This will power cycle the unit every time you set the alarm, thus clearing the led. In the book of words

For me there's too many grey areas at the mo, and bits can be down to interpretation . There needs to be a pocket guide type of thing for normal goons like me on the tools, and a revision at every update, what's changed and why...... I'd pay for sure, would others? depends on them i suppose. An electrical one was under £20 off memory. For something to refer back to whilst on site, would be handy.

Plain English for regs? 100% yes as an engineer!

Good stuff, did it go ok??

If the panel is 3 years old you might have compatibility issues, you've only been able to add a portal in the last few years

Aye, most doors we see are either fastened down from the inside, or locked halfway up, so popping them out would be hard going? Still, one site we had a hole cut IN the door. Big cat flap type job, wish I got a pic! Unlucky for them there was AX across the door and D/T in loading bay

Same tech also We tend to fit one, never been pulled up about it, then either DT, or AX across the door

tat imo, no different to b&q specials at premium prices. For those prices of the complete kit,, you could have one professionally installed by an nsi/ssaib co. That includes piece of mind, warranty & insurance approved graded system.

We've still got a load of Logic 4's and old Bentleys out there under maintenance, got a REALLY old ADE panel in our stores, boss wont let it go, cream metal cased thing with a KS, i'll have to grab a pic! First system I installed myself was probably an Optima!

Shouldn't have to though. The 'company' should have set it up properly in the first place.